You have an image for a Windows Embedded Standard 7 device.
The image supports English and Spanish. The image is configured for English. You need to set the Ul language, user, system, and input locale for the image from English to Spanish. What should you do?

• A. Run the lmageX.exe tool along with the /export option.
• B. Run the Wpeutil tool along with the /SetMuiLanguage option.
• C. Run the DISM tool along with the /Set-Alllntl option.
• D. Run the Sysprep tool along with the /generalize option.

You are creating a Windows Embedded Standard 7 image for a target device. You plan to use new hardware along with 8 GB of RAM in the target device. The device will run a database application that requires a large amount of physical memory. You need to ensure that the operating system can use all the RAM available in the device. What should you do?

• A. Use the Select Distribution Share option to select an x64 distribution share.
• B. Use the Select Distribution Share option to select an x86 distribution share.
• C. Run
  the bcdedit.exe /set increaseuserva
  3072 command
  during the
  appropriate configuration pass.
• D. Configure the PageFile\Size setting of EmbeddedEdition_x86.

You are developing a Windows Embedded Standard 7 image for 50 target devices. Each device will use a different type of plug-and-play printer. You need to ensure that the final image contains only the driver for the type of plug-and-play printer attached to the device. What should you do?

• A. Add a synchronous command that invokes the DPInst.exe tool during the auditUser pass to install the driver for the plug-and-play printer attached to the device. B.Create
  an answer
  file
  and set Windows
  Embedded/PnPCustomizationsWinPE
  for the DriverPaths element
  to the share location of the driver files.
  Run the Sysprep /unattend:"answerfile.xml" command.Restart the device.
• B. Run the Sysprep /audit /reboot command on the image. Install all given plug-and-play printer drivers. Run the Sysprep /generalize/oobe /shutdown command. Capture and deploy the image. Attach the plug-and-play printer to the device before the image is installed to the device.
• C. Create an answer file along with the Windows Embedded/PnPSysprep setting for the PersistAIIDevicelnstalls option set to TRUE. Allow the plug-andplay manager to install the plug-and- play printer driver.Restart the device.

You are updating a Windows Embedded Standard 7 device offline. You need to remove outdated files from previous updates on the device. What should you do?

• A. Run the Package Scanner tool along with the /Find-Scavenge option to generate an answer file. Use the DISM tool to apply the answer file.
• B. Run the DISM tool along with the /Get-Packages option. Use the DISM tool along with the/Remove-Package option to remove all packages that are found.
• C. Run the Package Scanner tool along with the /Get-Packages option to generate an answer file. Use the DISM tool to apply the answer file.
• D. Run the lmageX.exe tool along with the /delete option.

You are deploying a Windows Embedded Standard 7 custom image to 5,000 target devices over a network. You need to automate the process of installing custom files and folders during image installation. What should you do?

• A. Install the standard image by using Image Builder Wizard (IBW). Run the Sysprep /audit /generalize /shutdown command to start the computer in Audit mode. Copy the custom files and folders from a network-accessible share to their location on the target. Run the Sysprep /generalize/oobe /shutdown command.
• B. Use the lmageX.exe tool to capture the custom files and folders to a Windows Image (WIM) file. Save the file to a network-accessible share. Modify the images answer file to provide the source and destination locations for the WIM file. Install the standard image by using Image Builder Wizard (IBW) along with the answer file.
• C. Install the standard image to a reference target. Copy the custom files and folders from a network-accessible share to their destination location on the target. Start the target in WindowsPE and use the lmageX.exe tool to capture the image. Deploy the standard image to multiple computers by using WindowsPE and lmageX.exe.
• D. Install the standard image by using Image Builder Wizard (IBW). Copy the custom files and folders from a network-accessible share to their location on the target. Run the Sysprep /oobe command.