Attested NACE-CIP2-001 Dumps PDF Resource [2022]
Latest NACE-CIP2-001 Actual Free Exam Questions Updated 100 Questions
NEW QUESTION 15
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. True
- B. False
Answer: A
NEW QUESTION 16
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Correct the errors yourself and submit the reports without any further action
- B. Correct the errors yourself and suggest the Level 1 inspector be replaced
- C. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
- D. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
Answer: D
NEW QUESTION 17
You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified.
This is not a good choice because:
- A. It contains biocide
- B. The floating structure is stationary
- C. It doesn't contain biocide
- D. It will result in a very slippery surface
Answer: A
NEW QUESTION 18
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Request a re-blast of the item in question
- C. Review the NCR with the other Inspector
- D. Verbally challenge the NCR
Answer: A
NEW QUESTION 19
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. a), b) and c)
- B. Lower the blast pressure
- C. Increase the standoff distance
- D. Move the nozzle quicker
Answer: A
NEW QUESTION 20
Galvanizing performs best in which of the following exposures:
- A. pH below 4
- B. pH of 13
- C. pH between 5-10
- D. pH above 12
Answer: C
NEW QUESTION 21
Coating surveys may include which steps?
Select All That Apply:
- A. Summarize the collected data
- B. Schedule the remedial work
- C. Develop a survey plan
- D. Evaluate the coatings performance
Answer: A,B,C,D
NEW QUESTION 22
Which is used to calibrate a pH meter?
- A. Deionized water
- B. Standard buffer solution
- C. Distilled water
- D. Standard solvent solution
Answer: B
NEW QUESTION 23
When NACE/SSPC WJ 1 is referenced; what type of equipment would the Inspector expect to see on the job:
- A. Scarifiers
- B. Power Tools
- C. Water Jetting Equipment
- D. Abrasive Blasting Equipment
Answer: C
NEW QUESTION 24
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. False
- B. True
Answer: A
NEW QUESTION 25
You can use magnifiers to examine all of the following EXCEPT
- A. Blisters
- B. Surface cleanliness
- C. Mill scale
- D. Surface profile
Answer: B
NEW QUESTION 26
Inspector reports should always be copied to:
- A. The Contractor and Owner
- B. Whomever the Owner identifies
- C. All parties involved in the project
- D. The Owner only
Answer: B
NEW QUESTION 27
NACE Standards include:
- A. Material Requirements
- B. a) only
- C. Standard Practices
- D. a) & b)
Answer: D
NEW QUESTION 28
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Air changes
- B. a), b), and c)
- C. Structural integrity
- D. Lighting
Answer: B
NEW QUESTION 29
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Distribution
- B. Midstream
- C. Gathering
- D. Transmission
Answer: A
NEW QUESTION 30
Coating Surveys are legally required:
- A. On commercial marine vessels and offshore platforms
- B. On food and beverage vessels and can linings
- C. On high pressure gas lines and fireproofed structures
- D. On water tanks and potable water pipelines
Answer: A
NEW QUESTION 31
External coatings applied to buried pipelines are generally tested for:
- A. Solvent resistance
- B. Cathodic disbondment
- C. Gloss level
- D. Chalking resistance
Answer: B
NEW QUESTION 32
A failure caused by applying a coating too thinly is known as
- A. cracking.
- B. pinholes.
- C. chalking.
- D. failure to cure.
Answer: B
NEW QUESTION 33
......
NACE-CIP2-001 Certification Overview Latest NACE-CIP2-001 PDF Dumps: https://www.testvalid.com/NACE-CIP2-001-exam-collection.html
Free NACE-CIP2-001 Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1EY-apQoulPWfTqXtZEKYxtVTJzBdgrQs