[Jul 28, 2024] 301a Exam Dumps PDF Updated Dump from TestValid Guaranteed Success
Pass Your F5 Exam with 301a Exam Dumps
How to book the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
Register or log in on F5 Network website, or visit the Candidate Portal, or contact F5 Certification for more information.
How much F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Cost and Details
Examination Name F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Passing Score: 260 Length of Exam: 95 min Types of questions: Multiple Choice Questions No. of Questions: 82 Questions Examination Fees: $175 USD
NEW QUESTION # 70
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION # 71
Consider the monitor configuration displayed below.
What is the status of a pool member that responds with ''200 OK''?
- A. unknown
- B. down
- C. available
- D. disabled
Answer: B
NEW QUESTION # 72
Which process can be eliminated by terminating SSL communication on the LTM device rather than the backend pool members?
- A. obtaining SSL certificates from a certificate authority
- B. administering SSL on the web servers
- C. applying security patches on the backend pool members
- D. generating CSRS
Answer: B
NEW QUESTION # 73
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?
- A. HA Capacity
- B. Ordered List
- C. Load Aware
- D. HA Group
Answer: B
NEW QUESTION # 74
A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?
- A. Disable Nagle's Algorithm
- B. Disable Reset on Timeout
- C. Disable Slow Start
- D. Disable Selective ACKs
Answer: C
NEW QUESTION # 75
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. Forwarding (Layer 2)
- B. DHCP relay
- C. Standard
- D. Forwarding (IP)
- E. Stateless
Answer: D
NEW QUESTION # 76
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
- A. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1. - B. Interval 10, timeout 30
- C. Interval 30, timeout 30
- D. Interval 10, timeout 31
Answer: D
NEW QUESTION # 77
A web application is configured as follows:
What should be modified to set a maximum request limit?
- A. Virtual server settings
- B. Pool settings
- C. ICP Profile
- D. HTTP profile
Answer: D
NEW QUESTION # 78
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?
- A. A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough - B. A static SNAT
- C. SNAT automap enabled
- D. A SNAT pool with 4 IP addresses
Answer: D
NEW QUESTION # 79
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: C
NEW QUESTION # 80
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using multicast IP.
- B. The HA network is not configured for mirroring.
- C. The HA network latency is too high.
- D. The HA network is using the default routing domain.
Answer: A
Explanation:
NEW QUESTION # 81
A pool has four members. Ail of the servers have been designed and configured with the same application. Each client's request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?
- A. Least Connections
- B. Priority Group
- C. Observed
- D. Ratio
Answer: A
NEW QUESTION # 82
An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool members.
Which two virtual server types should be used to meet the requirements? (Choose two)
- A. Forwarding (Layer 2)
- B. Performance (Layer A)
- C. Standard
- D. Stateless
- E. Forwarding (IP)
Answer: B,C
NEW QUESTION # 83
An organization's development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team's load balancing method needs to select a pool after taking into account the pool member's response over the time to avoid landing on a busy pool member.
Which of the following load balancing methods meets this requirement?
- A. Dynamic (node)
- B. Fastest (application)
- C. Observed (member)
- D. Predictive (member)
Answer: D
NEW QUESTION # 84
An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:
tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages) No DoS attacks arc occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue?
- A. change the Adaptive Reaping Low watermark
- B. use a OneConnect profile
- C. allocate less memory to the RAM cache feature
- D. change the Adaptive Reaping High watermark
Answer: A
NEW QUESTION # 85
......
New Real 301a Exam Dumps Questions: https://www.testvalid.com/301a-exam-collection.html
301a Exam Dumps - F5 Practice Test Questions: https://drive.google.com/open?id=1rktEdICUenWrfYyg898FLpsgi2TOkZjF