Instant Download 301a Dumps Q&As Provide PDF&Test Engine [Q47-Q72]

Share

Instant Download 301a Dumps Q&As Provide PDF&Test Engine

Fast Exam Updates 301a dumps with PDF Test Engine Practice


Who should take the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

People who choose to receive an F5 Professional Certification, which certifies their abilities to manipulate the whole device stack, from standard network experience to specialized application-layer awareness, and the ability to combine the two realms. Candidates should be familiar with network fundamentals, protocols, and general traffic control principles. The student should also be familiar with the basics of F5 technologies as they pertain to network fundamentals, protocols, and traffic control. TestValid provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a exam dumps in PDF format, which candidates can import and review offline.

The following knowledge/abilities are required of candidates:

  • Describe the benefits of using a complete device proxy.
  • Describe HTTP's legitimate uses and processes.
  • Describe the Open Systems Interconnection (OSI) model's seven layers.
  • Recognize and identify the TMOS elements (F5 Traffic Management Operating System).

The F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam certification is a globally recognized credential that certifies individuals as F5 Certified Technology Specialists. If an applicant wishes to advance in their profession, they must develop their experience, qualifications, and abilities. This specialized expertise and ability is shown by the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam qualification. If an applicant has passed the F5 LTM Specialist: Architect, Setup, and Deploy 301a Exam and has knowledge of the related technology and skills needed to pass the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam, he can take this exam.


How to Prepare For F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Preparation Guide for F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Introduction

An F5 Certified BIG-IP Administrator can handle application delivery networks (ADNs) and F5 Traffic Management Operating System (TMOS) devices, as well as conduct routine management and troubleshooting. The F5-CA qualification requires passing two exams:

  • Exam 301a-TMOS Administration
  • Exam 101-Fundamentals of Application Delivery

Pre-existing BIG-IP implementations and provisional fault isolation are managed by an F5 Certified BIG-IP Administrator. They must be able to edit BIG-IP artefacts and make appropriate configuration adjustments. They're still in charge of application delivery networks (ADNs) and managing and troubleshooting F5 Traffic Management Operating System (TMOS) devices on a regular basis. These Certified Experts manage BIG-IP infrastructure such as virtual servers, pools, pool owners, nodes, accounts, and displays using TMSH and a setup utility. They also maintain BIG-IP repositories and build, rebuild, and manage them. Certified BIG-IP Administrators must therefore review the state, functionality, and statistics of a resource in order to consider how BIG-IP networks are actually handling traffic.

The function of BIG-IP systems as a proxy mechanism inside an ADN is defined by administrators. BIG-IP devices are set up, licensed, and provisioned by them. Profiles are used by a Certified BIG-IP Administrator to monitor how BIG-IP networks handle traffic across virtual servers. They're also in need of utilizing different medical methods to troubleshoot and diagnose issues. After it has been mounted, configured, and applied, passing this exam demonstrates independence in conducting day-to-day operations and simple troubleshooting of TMOS-based systems in different application environments. Individuals may opt to finish their credential path here or go on to the Technical Professional, Technical Specialist, Cloud, or Security Solutions tracks. In this guide we will cover all the aspects of F5-301a exam dumps and F5-301a practice exams.

 

NEW QUESTION 47
An LTM Specialist has detected that a brute force login attack is occurring against the SSH service via a BIG-IP management interface. Login attempts are occurring from many IPs within the internal company network. BIG-IP SSH access restrictions are in place as follows:

The LTM Specialist has determined that SSH access should only occur from the 192.168.1.0/24 and 172.16.254.0/23 networks.
Which tmsh command should the LTM Specialist use to permit access from the desired networks only?

  • A. modify/sys sshd login enable {''192.166.10/24'''' ''172.16 254 0/23
  • B. modify /sys sshd login disable (''10.0.00/8'', ''172 16.0 0/12'', ''192. 168.0.0/16'')
  • C. modify/sys allow replace-all-with {''192.168.1.00/24'', ''192.16.254.0/23''}
  • D. modify.sys sshd allow add {''192.168. 10/24 , '' ''172. 16 2540/23'')

Answer: C

Explanation:
Select C to overwrite the existing network's allow configuration over the specified network segment.

 

NEW QUESTION 48
Refer to the exhibit.

A pool is contoured with four members. A user has a current connection established with 10.18.1.40. The virtual server has a persistence Profile configured.

  • A. 10.18.1.10
  • B. 10.18.1.40
  • C. 10.18.1.30
  • D. 10.18.1.20

Answer: B

 

NEW QUESTION 49
A virtual server is experiencing intermittent port exhaustion. What should be done to fix this issue?

  • A. enable advanced routing
  • B. add more SNAT addresses
  • C. add more pool members
  • D. enable SNAT automap

Answer: B

 

NEW QUESTION 50
Refer to the exhibit.

An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?

  • A. VS_ B & SNAT A
  • B. VS_B&SNAT_B
  • C. VS_A&SNAT_B
  • D. VS_A & SNAT A

Answer: C

 

NEW QUESTION 51
AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

  • A. TCP, Client SSL, HTTP
  • B. TCP, Client SSL, Server SSL
  • C. TCP , Server SSL, HTTP
  • D. TCP, Client SSL, Server SSL, HTTP

Answer: D

 

NEW QUESTION 52
Refer to the exhibit.

An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?

  • A. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
  • B. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
  • C. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
  • D. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip

Answer: D

 

NEW QUESTION 53
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?

  • A. Least Connections (node)
  • B. Round Robin
  • C. Observed (node)
  • D. Predictive member)

Answer: C

 

NEW QUESTION 54
A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.

  • A. Performance (Layer 4)
  • B. Forwarding (Layer 2)
  • C. Standard
  • D. Stateless

Answer: C

 

NEW QUESTION 55
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?

  • A. assign a OneConnect profile
  • B. increase the connection limit for pool members
  • C. increase the idle Timeout in a custom TCP profile
  • D. use a Performance (Layer 4) Virtual Server

Answer: A

 

NEW QUESTION 56
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:

Which change must be made to the configuration to perform SSL offloading?

  • A. Remove the clientssl and serverssl profiles
  • B. Remove the clientssl and http profiles
  • C. Remove the severssl profile
  • D. Remove the clients profile

Answer: C

 

NEW QUESTION 57
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

  • A. Provision LTM to Dedicated, Provision AVR to Dedicated
  • B. Provision AVR to none. Provision LTM to Dedicated
  • C. Provision AVR to Minimum. Provision LTM at Maximum
  • D. Provision AVR to Minimum, Provision LTM to Dedicated

Answer: B

 

NEW QUESTION 58
AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

  • A. The LTM device exceeds licensed traffic limits.
  • B. The site has too many licensed modules.
  • C. The LTM device has not provisioned AVR.
  • D. The site is under DDOS attack

Answer: D

 

NEW QUESTION 59
What should the LT'M Specialist add to the virtual server?

  • A. Two Stream profiles, one profile for each rewrite requirement
  • B. one Stream profile and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)
  • C. one Stream profile with the expression of @http:// @https:// @
  • D. two Stream profiles and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)

Answer: B

 

NEW QUESTION 60
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?

  • A. iRule
  • B. Gateway pool
  • C. Gateway pool monitor
  • D. Gateway Fail Safe

Answer: D

 

NEW QUESTION 61
An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?

  • A. configure remote authentication and map support personnel users to the Operator user role
  • B. configure remote authentication for all users with a default user role of Guest
  • C. configure remote authentication for all users with a default user role of Operator
  • D. configure remote authentication and map support personnel users to the Guest user role

Answer: D

 

NEW QUESTION 62
An LTM Specialist has trouble with SNMP traps in the management network The ITM Specialist takes the network capture shown to troubleshoot:

What should the UM Specialist change to capture packets related to this workflow?

  • A. the interface
  • B. the tcpdump filter expression
  • C. the verbose level
  • D. the port

Answer: A

 

NEW QUESTION 63
Consider the monitor configuration displayed below.

What is the status of a pool member that responds with ''200 OK''?

  • A. available
  • B. unknown
  • C. disabled
  • D. down

Answer: D

 

NEW QUESTION 64
Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?

  • A. address translation disabled and port translation enabled
  • B. both address and port translation enabled
  • C. address translation enabled and port translation disabled
  • D. both address and port translation disabled

Answer: B

 

NEW QUESTION 65
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?

  • A. Interval 10, timeout 30
  • B. Interval 30, timeout 30
  • C. Interval 10, timeout 31
  • D. Interval 30, timeout 91
    The official recommendation is that timeout 3 times the interval value +1.

Answer: C

 

NEW QUESTION 66
Exhibit.

Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?

  • A. LTM1 Standby / LTM2 Standby
  • B. LTM1 Active /LTM2 Active
  • C. LTM1 Standby / LTM2 Active
  • D. LTM1 Active / LTM2 Standby

Answer: D

 

NEW QUESTION 67
AN LTM Specialist needs to determine the delay between an LTM device and the internal web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay? (Choose two.)

  • A. Server latency
  • B. Client IP
    The problem is to specify the server delay of the client
  • C. User agents
  • D. Response codes
  • E. Methods

Answer: A,B

 

NEW QUESTION 68
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?

  • A. SNAT automap enabled
  • B. A static SNAT
  • C. A SNAT pool with IP address
    Explanation
    One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough
  • D. A SNAT pool with 4 IP addresses

Answer: D

 

NEW QUESTION 69
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?

  • A. Creating the required separate interface for connection mirroring
  • B. Decreased number of possible concurrent connections to that virtual server
  • C. Impact on system performance that might be noticeable
  • D. The add-on license that is required for this feature to be available

Answer: C

Explanation:
Connection mirroring will bring performance consumption

 

NEW QUESTION 70
An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?

  • A. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
  • B. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
  • C. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
  • D. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot

Answer: C

Explanation:
Switch guest, reactive, license first and then upgrade.

 

NEW QUESTION 71
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?

  • A. tcp, clientssl, serverssl
  • B. tcp, http, clientssl
  • C. http, clientssl, persistence
  • D. tcp, http, request logging

Answer: B

 

NEW QUESTION 72
......


The benefit of obtaining the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Certification

If you deal with F5 on a regular basis, you know that being an F5 specialist entails more than memorizing commands and configuring BIG-IP modules. True application management managers and engineers understand that you'll need a diverse set of skills, including networking, server management, protection, and production. F5 Certified Technology Specialists qualification can be obtained by passing the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam. The function of BIG-IP systems as a proxy mechanism inside an ADN is defined by administrators. BIG-IP devices are set up, licensed, and provisioned by them. Profiles are used by a Certified BIG-IP Administrator to monitor how BIG-IP networks handle traffic across virtual servers. They're also in need of utilizing different medical methods to troubleshoot and diagnose issues. After it has been mounted, configured, and applied, passing this exam demonstrates independence in conducting day-to-day operations and simple troubleshooting of TMOS-based systems in different application environments. Individuals may opt to finish their credential path here or go on to the Technical Professional, Technical Specialist, Cloud, or Security Solutions tracks. In this guide we will cover all the aspects of F5-301a exam dumps and F5-301a practice exams. Candidates will serve as an F5 Certified BIG-IP Administrator Network Engineer, F5 Certified BIG-IP Administrator Load Balancer/ADC, F5 Certified BIG-IP Administrator Architect, or F5 Certified BIG-IP Administrator Engineer after earning their F5 Certification. The candidate has the potential to raise $75,000 a month.

 

Exam Valid Dumps with Instant Download Free Updates: https://www.testvalid.com/301a-exam-collection.html

301a Dumps First Attempt Guaranteed Success: https://drive.google.com/open?id=1BKm0ipw-c_tR2kt-WqXTRfIFfGlaD44X