Use Real 300-625 Dumps - Cisco Correct Answers updated on 2022
CCNP Data Center 300-625 Exam Practice Dumps
Exam Content to Explore
Each candidate has 90 minutes to write the Cisco 300-625 exam, which is only available in English and includes multiple-choice questions. There will be 60 items in total and you will need to earn at least 825 points to clear the test with flying colors. If you are ready to continue on the path of the Cisco certification, you can refer to the Pearson VUE website to schedule the exam date.
Career Opportunities to Expect
Passing the Cisco 300-625 exam and earning the associated certification is a great way to add the Data Center SAN Implementation skills to your areas of expertise and your CV. You’ll become more confident in your abilities and your supervisor will get a reason to promote you. Getting this professional-level certificate is also a way to show off your knowledge of data center networks, their implementation, and proper maintenance. So, all the holders of the CCNP Data Center certification are qualified to work as Data Center Analysts, Data Center Designers, Systems Engineers, Data Center Technicians, Technical Consulting Engineers, and much more. These are very good options for those who are looking for a higher salary because your potential income can be from $20,500 to $163,500 per annum.
NEW QUESTION 39
What does an unlicensed DCNM SAN fail to display?
- A. events and fault management
- B. real-time performance monitoring
- C. Fibre Channel, FCoE, and iSCSI topologies
- D. historical performance monitoring
Answer: B
NEW QUESTION 40
Which benefit of upgrading to the Cisco DCNM server-based advanced feature license for a Cisco MDS switch is correct?
- A. The license can be reassigned when a switch is replaced with a newer version within the same product family
- B. The license can be assigned to either server MAC address or switch serial number
- C. An unlimited number of devices can be added to the list of licensed devices
- D. The license can be reassigned when the switch is replaced with a Cisco Nexus switch
Answer: A
NEW QUESTION 41
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. fabric controller
- B. time server
- C. management server
- D. name server
Answer: A
NEW QUESTION 42
Refer to the exhibit.
A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - B. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range. - D. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A.
Answer: A
NEW QUESTION 43
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. operating system
- B. hardware anchor
- C. kemel
- D. bootloader
- E. microloader
Answer: A,D
NEW QUESTION 44
Refer to the exhibits. A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1). The engineer is then notified that there is a SAN outage (Exhibit
2). What is the cause of the outage?
- A. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.
- B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
- C. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
- D. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
Answer: A
NEW QUESTION 45
A storage network engineer must install and configure a new MDS switch in a data center network.
Which two statements about available choices during the MDS switch initial setup are correct?
(Choose two.)
- A. The engineer can configure the default zone policy.
- B. The engineer can choose what will be the administrator account.
- C. The engineer does not have the choice to enable or disable full zoneset distribution.
- D. The engineer can configure the default switch port trunk mode.
- E. The secure password standard is required.
Answer: A,B
NEW QUESTION 46
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches.
The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
- C. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
Answer: D
NEW QUESTION 47
Which action must be performed to deactivate a VSAN without losing its configuration?
- A. Delete it.
- B. Rename it
- C. Isolate it.
- D. Suspend it.
Answer: D
NEW QUESTION 48
Refer to the exhibit.
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtuahzes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT and increases the cost to 600.
- B. The MDS-Core simulates an IVR NAT and decreases the cost to 400.
- C. The MDS-Core simulates an IVR NAT. and the FSPF cost is 500.
- D. The MDS-Core simulates an IVR NAT and increases the cost to 501.
Answer: C
NEW QUESTION 49
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. IVR NAT
- B. virtual domains
- C. auto topology
- D. transit VSANs
Answer: A
NEW QUESTION 50
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. Dynamic Port VSAN Membership
- B. Cisco Fabric Services distribution over Fibre Channel
- C. local switching of east-west traffic
- D. E Port connectivity to the core switch
Answer: B
Explanation:
Section: Implementation
NEW QUESTION 51
Refer to the exhibit. The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work.
Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2
Answer: C
NEW QUESTION 52
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?
- A. The rename command is moved to the rejected list and the add command executes successfully.
- B. Both commands are moved to the rejected list.
- C. Both commands execute successfully.
- D. The device alias is renamed and the add command is moved to the rejected list.
Answer: C
NEW QUESTION 53
Drag and drop the boot issues from the left onto the correct solutions on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide/b_Cisco_Standalone_Series_NX-OS_Troubleshooting_Guide_chapter_01.html#reference_7F7ADD86A12B4D2389E478280BE037A0
NEW QUESTION 54
......
In case you are willing to start preparing for the Cisco 300-625 test, you are advised to familiarize yourself with the full list of its topics, which includes the following:
- Implementation (35%): This is the largest area of the test that covers a lot of details that you need to know about. Thus, it is important to know how to implement FCoE, Fibre Channel port channels, NPIV and NPV, Fibre Channel protocol services, VSANs and VSAN extensions, as well as zoning and device aliases. Besides that, you should have the knowledge of the Enhanced transmission selection, priority flow control, and FCoE Initialization Protocol;
- Deployment (15%): The first section is about the initial setup, installation processes, and secure boot. This means that you should know about POAP, DCNM, and NX-OS;
- Monitoring & Management (25%): Here, your skills in configuring RBAC, DCNM, and Fibre Channel fabric security will be evaluated. A potential candidate has to know about the slow-drain analysis and implementation of SAN telemetry streaming. Don’t forget about the DCNM-SAN client, DCNM Device Manager, and licensing options as well;
- MDS Troubleshooting (25%): To be able to answer the questions from this subject area, you need to have knowledge of how to troubleshoot the issues with upgrade and boot, zone merge and zoning failure, as well as duplicate domain ID and Fibre Channel domains.
Get ready to pass the 300-625 Exam right now using our CCNP Data Center Exam Package: https://www.testvalid.com/300-625-exam-collection.html