Latest HP HPE0-S22 First Attempt, Exam real Dumps Updated [Oct-2021]
Get the superior quality HPE0-S22 Dumps Questions from TestValid. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION 51
A customer operates a data center based on third-party servers, which includes third-party storage with an iSCSI SAN.
The architect needs to design a solution that can seamlessly access the current data from a new HPE Moonshot system.
How can the HPE Moonshot system access the legacy storage?
- A. using native iSCSI target software to connect to the storage on a dedicated LAN
- B. using an HPE Multifunction router to convert iSCSI to Virtual Connect
- C. using native iSCSI initiator to connect to the storage on a dedicated LAN
- D. using native iSCSI initiator to connect to the storage on the management LAN
Answer: C
NEW QUESTION 52
An architect needs to demonstrate the financial advantages of a proposed HPE server and Hypervisor- based solution compared to a legacy server environment that has traditional servers and desktops.
Which tool should the architect use?
- A. Client Virtualization ROI Calculator
- B. HPE Business Technology Optimization
- C. HPE Business Process Monitor
- D. Hyperscale Business Value Calculator
Answer: D
NEW QUESTION 53
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- B. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
- C. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
- D. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
Answer: A
NEW QUESTION 54
A customer has HPE BladeSystem BL460c Gen9 blades with two processors and 512GB of memory. The blades are running a MS-SQL database on a clustered 2TB SAS virtual volume that is exported from an HPE
3PAR StoreServ 8200. The customer reports that the MS-SQL database is performing poorly.
After extensive performance trending analysis, it is determined that the database front-end I/O requirements are unpredictable and often exceed 100,000 IOPs with latency in excess 30ms at critical times.
Which solution should the architect recommend to resolve the performance issue with consideration to cost and complexity?
- A. Install SSD drives local to the BL460c.
- B. Add Adaptive Optimization licensing.
- C. Increase the memory on the blades to 2TB.
- D. Install an HPE IO Accelerator on the blade.
Answer: A
NEW QUESTION 55
An architect needs to scope the number of required m710p cartridges for video transcoding. The architect plans to aim for an additional 20 to 25 percent growth capacity.
In addition to this growth capacity, which factors will determine the number of required cartridges? (Choose two.)
- A. the number of formats to which to convert
- B. the amount of storage capacity required
- C. the amount of memory required
- D. the number of video streams required
- E. the number and type of processors
Answer: B,D
NEW QUESTION 56
A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The HPE XL250a server supports DDR4 HPE Smart Memory.
- B. The HPE XL250a server supports dual accelerators.
- C. The HPE XL250a server provides full length PCIe expansion slots.
- D. The HPE XL250a server delivers dual processor performance.
Answer: B
Explanation:
Explanation
The HPE ProLiant XL250a Gen9 Server delivers 2P performance for your budget with dual accelerator support, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency.
This server features the Intel Xeon E5-2600 v3/v4 series processors and 16 DIMM slots are ready with DDR4 2133 (1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE Smart Memory.
NEW QUESTION 57
A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application.
What first detects data corruption caused by an installed DIMM module?
- A. the application using the data
- B. the XNC2 controller in the internal fabric
- C. the Superdome X firmware
- D. the OS installed on the nPartition
Answer: C
Explanation:
Explanation
NEW QUESTION 58
An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?
- A. Mixing different models of cartridges in the same chassis is not supported
- B. Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
- C. A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at
1Gbps rather than 10Gbps - D. A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
Answer: D
NEW QUESTION 59
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution, Which solution meets these requirements?
- A. HPE Intelligent Provisioning (IP)
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE OneView 2.0
Answer: C
Explanation:
Explanation/Reference:
Reference: https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjU36a30sHTAhVJShQKHSt0 BhYQFggnMAA&url=http%3A%2F%2Fwww.hpe.com%2Fsupport%
2Fmoonshot_os_deployment_en&usg=AFQjCNHzc8octr9gtYrHDWIERZNfWTSoEw&sig2=ITJAdGidDUO SlN-6u7QKeQ
NEW QUESTION 60
An architect is planning an HPE Integrity Superdome X solution with the following nPartitions:
nPar 1= Slots 1, 3, and 5
nPar 2 = Slots 2, 4, and 6
The Superdome X solution must connect to a Fibre Channel SAN solution, which provides boot disks for the Superdome X solution.
The architect has selected a Flexible LOM adapter for each blade.
What is a valid plan for additional adapters?
- A. one 2-port FC HBA each for slot 2, slot 4, and slot 6
- B. one 2-port FC HBA each for slot 1, slot 3, and slot 5
- C. one 2-port FC HBA for slot 1
- D. one 2-port FC HBA each for slot 1 and slot 2
Answer: A
NEW QUESTION 61
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution,
Which solution meets these requirements?
- A. HPE Intelligent Provisioning (IP)
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE OneView 2.0
Answer: C
Explanation:
Explanation/Reference:
Reference https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjU36a30sHTAhVJShQKHSt0 BhYQFggnMAA&url=http%3A%2F%2Fwww.hpe.com%2Fsupport%
2Fmoonshot_os_deployment_en&usg=AFQjCNHzc8octr9gtYrHDWIERZNfWTSoEw&sig2=ITJAdGidDUO SlN-6u7QKeQ
NEW QUESTION 62
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?
- A. The customer's network infrastructure is based on QoS service.
- B. The customer needs the system to recover quickly from a failure.
- C. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
- D. The customer plans to increase the memory in the nodes in the future.
Answer: C
NEW QUESTION 63
An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO
Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?
- A. IT staff can open a Remote Console to any cartridges linked to an mRCA through the iLO CM.
- B. Remote console access is only supported when a cartridge is part of an HPE Helion
CloudSystem solution. - C. IT staff can open a Remote Console to any cartridge through the iLO CM.
- D. Remote console access is not supported for cartridges; IT staff should use local consoles instead.
Answer: A
Explanation:
References:
NEW QUESTION 64
An architect takes the following notes during a meeting with a customer:
plans to introduce an entirely new service offering to customers
servers will be virtualized and will consume large amounts of storage space project is to operate in an isolated section of the data center with limited access to the corporate network need flexibility to grow quickly as required by the new service demands on the infrastructure has no repeatable process for firmware management concerned about how long it will take for the project team to become productive on the new infrastructure Which solution should the architect propose to help the customer overcome all of its project challenges?
- A. HPE Apollo 2000 solution with HPE 3PAR storage
- B. HPE Apollo 6000 solution with HPE 3PAR storage
- C. HPE BladeSystem solution with HPE 3PAR storage
- D. HPE ConvergedSystem 700 solution with HPE 3PAR storage
Answer: D
Explanation:
https://cc.cnetcontent.com/vcs/hp-ent/inline-content/MV/A/D/ADE8A45C9283DBF4D37DF063919E72E2BFEA41EF_source.PDF
NEW QUESTION 65
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment.
Which solution should the architect propose to protect the customer from this threat?
- A. Use Smart Array Controllers.
- B. Enable Legacy BIOS mode.
- C. Use encrypted drives.
- D. Enable UEFI secure boot mode.
Answer: D
Explanation:
References:
NEW QUESTION 66
A customer recently purchased an HPE Moonshot chassis to host its internal website.
Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
- A. how to use SCCM to provide a graphical installation method for new nodes
- B. how to add an mRCA module to provide a graphical installation method for new nodes
- C. how to use iLO remote console to provide a graphical installation method for new nodes
- D. how to use VSP to provide a graphical installation method for new nodes
Answer: B
Explanation:
In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.
References:
NEW QUESTION 67
A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies.
Which solution should the architect recommend to help solve these issues?
- A. HPE OneView 2.x
- B. HPE Advanced Power Manager
- C. HPE Insight Remote Support
- D. HPE Power Advisor
Answer: B
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3291ENN.pdf
NEW QUESTION 68
A customer is planning to migrate from a Virtual Connect Enterprise Manager (VCEM) environment to HPE OneView.
Which topic should the architect discuss with the customer before the migration is implemented?
- A. that migration to the HPE OneView will replace existing WWNs and MAC addresses with new ones, assigned by HPE OneView
- B. that HPE OneView Advanced licenses should be added to the appliance prior to the migration
- C. that additional one-time-use licenses are required for migration
- D. that direct migration from the VCEM is not possible and the customer should plan to remove VC Domain from VCEM first
Answer: D
NEW QUESTION 69
An architect proposes an HPE Moonshot solution to a customer. The customer informs the architect that the data center switches can only provide four 40GbE ports per rack.
How should the architect modify the proposed solution so that each rack meets the requirement?
- A. Create two Intelligent Resilient Framework (IRF) fabrics, each with four switch modules, and let the switches in each fabric share uplinks
- B. Use the iLO Chassis Management (CM) module port to support both iLO and production traffic on four of the HPE Moonshot chassis
- C. Use the iLO Chassis Management (CM) module port to daisy chain the chassis together and let the chassis in the daisy chain share uplinks
- D. Replace the 45XGc modules with the 180G module to aggregate uplink ports on multiple chassis into a single port
Answer: C
NEW QUESTION 70
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE Intelligent Provisioning (IP)
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE OneView 2.0
Answer: C
NEW QUESTION 71
An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?
- A. Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
- B. Change the 4-QSFP+Uplink Module to a 16-SFP+ Uplink Module.
- C. Add another HPE Moonshot 45XGc Switch and 4-QSFP+Uplink Module.
- D. Add another FlexibleLOM adapter for each cartridge.
Answer: D
NEW QUESTION 72
What is a basic assumption for an architect using the HPE Servers TCO calculator to justify a customer's migration away from a fully depreciated set of hardware?
- A. The Net Present Value (NPV) is the difference between the value of the older systems and the cost of the new systems.
- B. When the customer's older systems are under a support contract, a new system can sometimes pay for itself simply by not renewing the older support contracts.
- C. By analyzing the project's internal rate of return (IRR), it is possible to determine if the lower IRR will make it more desirable to undertake the project.
- D. The opportunity costs of not migrating from a legacy environment to an HPE Converged
Infrastructure Solution, in terms of IT Efficiency and User Productivity, will always justify the purchase.
Answer: A
NEW QUESTION 73
A customer requires a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis fully populated with cartridges. The populated chassis provide the following in total:
- 135 processors with four 2.9GHz cores each
- 4.23TB RAM
- 64.8TB local storage on SSDs
An aspect of the design is under provisioned and is likely to cause performance to degrade to one-tenth or even one-hundredth of its potential.
How can the architect resolve this problem?
- A. Scale the memory capacity by selecting higher capacity DIMM's for the cartridges
- B. Select different cartridges that provide more processor cores
- C. Select different cartridges that provide more nodes per cartridge
- D. Scale the SSD capacity by adding cartridges or selecting higher capacity SSDs
Answer: D
NEW QUESTION 74
......
Guaranteed Success with Valid HP HPE0-S22 Dumps: https://www.testvalid.com/HPE0-S22-exam-collection.html