Pass Avaya Avaya Aura® Communication Applications Integration Exam Exam in First Attempt Guaranteed Updated Dump from TestValid!
Pass 71300X Exam with 70 Questions - Verified By TestValid
NEW QUESTION 30
When planning the Avaya Session Border Controller for Enterprise (SBCE) for SIP Trunking, what is a good practice to adopt?
- A. Use one Avaya Session Border Controller for Enterprise on the internal and external sides of the network.
- B. Name all internal and external interfaces exactly the same.
- C. Use the same IP address on both, internal and external sides of the network.
- D. Name Interfaces consistently, for example, A1 for Internal network to Call Server and B1 for external to Trunk Server.
Answer: D
Explanation:
Explanation
Use the same interface mapping throughout! Examples in this section use:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
304
NEW QUESTION 31
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?
- A. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.
- B. Verify that an enrollment password is configured on System Manager and that it has not expired.
- C. Verify that Avaya BreezeTM is licensed.
- D. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
Answer: B
Explanation:
Explanation
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
b. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page 223
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 32
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, you need to download the 46xxsettings.txt file to a Remote Worker device.
What needs to be configured under DMZ Services > Relay Services?
- A. Application Relay
- B. Reverse Proxy
- C. Application Relay and Reverse Proxy
- D. Application Relay and File Transfer
Answer: A
Explanation:
Explanation
Relay Services are used to define how file transfers (e.g., for phone firmware upgrades and configuration), are routed to the Remote Worker endpoints.
Example: 2 For accessing the file server using HTTPS protocol
The following screenshot shows the newly created Relay Services
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 73
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 33
On Avaya Session Border Controller for Enterprise (SBCE), which statement about how to examine messages with Wireshark is true?
- A. Wireshark runs directly on Avaya Session Border Controller for Enterprise (SBCE).
- B. You have to start and stop the .pcap file using command line.
- C. You can start and stop a Packet Capture in the EMS web GUI and then you can open the .pcap file with Wireshark.
- D. They cannot be examined on this version.
Answer: C
Explanation:
Explanation
Viewing the Packet Capture with Wireshark.
0. Start a Packet Capture in the EMS web GUi.
1. After the capture completes, click the Capture tab.
2. Double-click on the capture file name.
3. The File Download window opens.
4. Click Open.
The Wireshark application opens the trace.
Note: The Wireshark call tracing tool can be used on virtual desktop for vLabs.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
468
NEW QUESTION 34
After the initial provisioning script has been run you see your Avaya Session Border Controller for Enterprise (SBCE) displaying a Registered state in the Web GUI. You click on the install link in the EMS System Management > Devices menu to continue the installation.
After displaying a status of Provisioning for a short while, which status does the SBCE display?
- A. Up
- B. Commissioned
- C. Busyout
- D. Maintenance-Busy
Answer: B
Explanation:
Explanation
SBC states:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
201
NEW QUESTION 35
An Avaya Aura Messaging (AAM) server intended to store Voice Messages in Avaya Message Store Mode, and you are configuring that server for integration with an Avaya Aura Core.
In Messaging Administration > Server Settings > Server Role/AxC Address, which Server Role must be chosen at the "Roles for this server" field?
- A. AMSM
- B. Storage Only
- C. Storage & Application
- D. Application Only
Answer: C
NEW QUESTION 36
By default, which Codec does Avaya Aura Messaging (AAM) support?
- A. G.711
- B. G.726
- C. G.722
- D. G.729
Answer: A
Explanation:
Explanation
You must configure the Messaging system to use the G.711 encoding format.
Note: The G.711 format provides the highest audio quality especially when voice networks use multiple encodings and decodings. Avaya requires that you use the G.711 encoding format in Messaging systems that support TTY devices.
The G.711 encoding format uses a higher encoding rate than GSM. The G.711 encoding format therefore produces larger files and requires more storage space for messages. Messaging provides customers with adequate storage space for message playback and networking.
References: Administering Avaya Aura Messaging, Release 6.2 Issue 2.2 (December 2013) , page 201
https://downloads.avaya.com/css/P8/documents/100172127
NEW QUESTION 37
You are creating a SIP Entity for Avaya Aura Engagement Development Platform - EDP / Avaya BreezeTM.
What do you have to enter in the field labeled FQDN or IP Address?
- A. the IP-Address or FQDN of Core Platform Cluster
- B. the IP-Address or FQDN of general Purpose Cluster
- C. the Management IP-Address or FQDN of the Avaya BreezeTM platform.
- D. the SM100 IP-address or FQDN of the Avaya BreezeTM platform
Answer: C
Explanation:
Explanation
Administering an Avaya Breeze instance
Before you begin
To complete this task you will need:
* The IP address of the Avaya Breeze Management Network Interface.
This is the same IP address you used when deploying the Virtual Machine (VM).
* The IP address including the network mask, and default gateway for the Avaya Breeze Security Module.
Procedure (see step 6 below)
1. On System Manager, in Elements, click Avaya Breeze.
2. Click Server Administration.
3. In the Avaya Breeze Server Instances list, click New.
4. In the SIP Entity field, select the SIP Entity that you created.
5. Ensure that the value in the UCID Network Node ID field is unique across the solution deployment so that it does not conflict with other UCID-generating entities like Avaya Aura Communication Manager or Avaya Aura Experience Portal.
6. In the Management Network Interface FQDN or IP Address field, type the IP address of the Avaya Breeze Management Network Interface.
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 47
https://downloads.avaya.com/css/P8/documents/101014426
NEW QUESTION 38
Which access control method is used by the Avaya Aura Application Enablement Services (AES) server for administrators?
- A. Role-Based Access Control
- B. System Manager AES Management Menu
- C. Single Administrator simple password login
- D. Challenge-Response shared-key method only
Answer: A
Explanation:
Explanation
Role Based Access Control (RBAC)
Access to AE Services Management Console Web pages can be restricted by user authorization level. The operations that users are allowed to perform such as read, edit and delete can also be restricted.
References: Avaya Aura Application Enablement Services Overview and Specification, Release 7.0.1, Issue 2 (June 2016), page 20
https://downloads.avaya.com/css/P8/documents/101014052
NEW QUESTION 39
You are creating the identity certificates that must be installed in the Avaya Session Border Controller for Enterprise (SBCE).
Which statement about installing the certificate files in the SBCE is true?
- A. Both the PEM and Key files must be in a zip file.
- B. The cert file and the Key filenames generated by the Certificate Authority must match.
- C. The SBCE must be rebooted before the files installation.
- D. The cert file and the Key filenames generated by the Certificate Authority must be different.
Answer: B
NEW QUESTION 40
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.
What would you do first to resolve the issue?
- A. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
- B. Reboot SBCE.
- C. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.
- D. Restart Applications.
Answer: C
Explanation:
Explanation
The interface might need to be enabled.
2. Click on the Interface Configuration tab.
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
204
NEW QUESTION 41
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)
- A. adding new feature buttons to agent sets
- B. invoking CM features
- C. performing a remote reboot to the CM server
- D. receiving notifications of events
- E. controlling specific calls or stations
- F. completing the routing of incoming calls
Answer: B,D,E,F
Explanation:
Explanation
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura Application Enablement Services TSAPI for Avaya Communication Manager Programmer's Reference Release 6.1, page 128
https://downloads.avaya.com/css/P8/documents/100141354
NEW QUESTION 42
The provisioning script automatically runs as part of the first boot-up of the Avaya Session Border Controller for Enterprise (SBCE). During this process you assign the Management IP address to the SBCE. You browse to the Element Management System (EMS) to continue to install the SBCE.
On the System Management > Devices web page, which status does the SBCE display before the Install link is clicked?
- A. Ready
- B. Commissioned
- C. Provisioned
- D. Registered
Answer: D
Explanation:
Explanation
References: Avaya Aura Session Border Controller Enterprise (2012), page 201
NEW QUESTION 43
From a remote worker's SIP Endpoint connected via Mobile Workspace, which tool is used to trace the successful way through Avaya Session Border Controller for Enterprise (SBCE) of an Invite message?
- A. traceRT
- B. traceSBC
- C. traceMW
- D. traceSM
Answer: D
Explanation:
Explanation
traceSM is an interactive perl script that allows an administrator to capture, view, and save call processing activity on a Session Manager. While not as powerful or versatile as wireshark, traceSM is absolutely essential when it comes to working with Avaya SIP. First off, it allows you to view SIP messages even if they have been encrypted with TLS.
NEW QUESTION 44
The WebRTC snap-in needs to be loaded on which of Avaya BreezeTM cluster?
- A. Context Store EDP Cluster
- B. General Purpose EDP Cluster
- C. Work Assignment EDP Cluster
- D. Core Platform EDP Cluster
Answer: D
Explanation:
Explanation
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.
NEW QUESTION 45
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It is making DSP resources available regardless of the originating location of a call.
- B. It allows for signaling-groups to be used by more than one trunk-group.
- C. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- D. It is a W3C specification that allows cross-domain communication from the browser.
Answer: D
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 46
Which three steps are necessary to make a successful Implementation of Avaya BreezeTM WebRTC Snap-in?
(Choose three.)
- A. Load the Snap-in.
- B. Busy and Release the WebRTC snap-in.
- C. Download and Install WebRTC License file.
- D. Install the Snap-in.
- E. Manually configure the WebLM IP address in the WebRTC configuration attributes.
Answer: A,C,D
Explanation:
Explanation
Step 1: Download and install the license file
Procedure
0. Download the snap-in license file from PLDS.
1. On System Manager navigate to Home > Services > Licenses.
2. Select Install License.
3. Browse to the location of the snap-in license.
4. Select the license file and click Open.
5. Click Accept the License Terms & Conditions and click Install.
The system installs the license file.
In the left navigation pane, the system displays the snap-in under Licensed Products.
Step 2: Load the snap-in
Step 3: Install the snap-in
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 15
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 47
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?
- A. one Subscriber Flow and one Server Flow
- B. a minimum of two Subscriber Flows
- C. one Subscriber Flow and two Server Flows
- D. a minimum of two Server Flows
Answer: C
Explanation:
Explanation
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
540, 546
NEW QUESTION 48
Which three functionalities does WebRTC provide? (Choose three.)
- A. NAT / Firewall Traversal
- B. real-time audio and video conferencing
- C. Internet-friendly codecs and Privacy
- D. adds click-to-call capabilities from a web application to an Avaya endpoint
Answer: A,B,D
Explanation:
Explanation
* One of the primary differentiating features for the WebRTC Snap-in is that the web application handles authentication and authorization of calls. This includes the capability to assert a calling user's phone number and restrict the numbers that can be called.
* The Avaya SBCE enables secure firewall traversal for HTTP and SRTP packets, facilitates sending DTLS to provide secured key exchange for the SRTP flow, and takes care of all security requirements mentioned in the TURN protocol for the solution.
* WebRTC can be a game changer for enterprise communications and customer engagement. Enterprises can now add real-time communications to any website.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 9
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 49
Which statement about the SIP Entities to support single node Avaya Aura Presence Services is true?
- A. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Other".
- B. Only one SIP Entity is built of Type = "Presence Services", which uses the SM100 IP address of the Avaya BreezeTM node.
- C. Only one SIP Entity is built of Type = "Avaya Breeze", which uses the SM100 IP address of the Avaya BreezeTM node.
- D. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Presence Services".
Answer: C
NEW QUESTION 50
When Avaya Aura Presence Services is implemented, which statement is true about Port Management?
- A. Port 5222 is used for one-X Endpoints, while Port 5269 is open for connecting with other XMPP
3rd-Party Servers. - B. It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.
- C. It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.
- D. It allows multi-media services over a standard Web-Browser.
Answer: A
Explanation:
Explanation
Port 5222: XMPP connection configuration
The Connection Manager runs by default when you install the XCP server. It is configured with a JSM Command Processor and two XMPP directors. The XMPP directors handle communication with IM clients.
One of the directors is configured to use port 5222 and the other is configured to use port 5223 for secure communications.
Port 5269:Example Obtaining the Server-to-Server Port from an Openfire server Procedure
1. Log in to the Openfire Web console.
2. Click Server > Server Settings > Server to Server.
3. In the Service Enabled section, the Enabled check box should be checked, and the port value is contained in the box to the right of Remote servers can exchange packets with this server on port.
By default the value is 5269, and it is recommended that this default value be maintained.
References: Administering Avaya Aura Presence Services, Release 6.2.4, (June 2014), pages 110, 154
https://downloads.avaya.com/css/P8/documents/100180467
NEW QUESTION 51
To set Timers, URI Manipulation, and Header Manipulation that the Avaya Session Border Controller for Enterprise (SBCE) will use when signaling to the far-end server; a profile like "avaya-ru" is provided by default.
When configuring the Server Configuration, you must link to which type of Global profile?
- A. Routing
- B. Server Interworking
- C. Topology Hiding
- D. Signaling
Answer: B
Explanation:
Explanation
The standard Avaya profile "avaya-ru" is cloned for the Call Server Interworking Profile.
The Interworking function of the Global Profiles feature enables the SBCE to function in an enterprise VoIP network using different SIP protocols.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
339
NEW QUESTION 52
The Avaya WebRTC solution uses the web intensively to make media calls from a standard web browser in the internet, into internal and secure communication premises in the enterprise.
Which statement about security between the Enterprise-edge and those standard Web browsers in the internet is true?
- A. A trust relationship based on certificates must be built to make WebRTC work.
- B. There must be a VPN connection between the Web Browser and the Enterprise-edge to build a WebRTC link.
- C. WebRTC only works within the Enterprise network. External Web Browsers must connect through an Avaya Session Border Controller for Enterprise (SBCE) via a SIP trunk.
- D. No trust relationship exists between enterprise edge security and web browsers; therefore, the security strategy is based on an Authorization Token instead.
Answer: D
Explanation:
Explanation
Validation of the authorization token.
The WebRTC Snap-in will validate the authorization token created and encrypted by the web server. If the snap-in can decrypt the token and ensure that the time stamp is valid, it knows that the incoming HTTP request is valid. The time stamp will usually be short lived; on the order of 5-10seconds to protect against reply attacks.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 27
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 53
......
Avaya 71300X Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Penetration testers simulate 71300X exam: https://www.testvalid.com/71300X-exam-collection.html