[Nov-2021] Study resources for the Valid 2V0-41.20 Braindumps!
Updated 2V0-41.20 Tests Engine pdf - All Free Dumps Guaranteed!
Difficulty in Writing Professional VMware NSX-T Data Center 2V0-41.20 Exam
One of the most important certifications that applicants may have on their resume is Professional VMware NSX-T Data Center 2V0-41.20 certified. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them.
Professional VMware NSX-T Data Center 2V0-41.20 exam is not an easier one and can turn out to be a very difficult certification if not well prepared. If professionals give 2V0-41.20 practice tests, they can better prepare for the exam while having understanding of the exam format and types of questions asked.
Applicants may, however, clear the exam with the right concentration and the right preparation material. TestValid have the most up-to-date learning materials, having a fair understanding of the question trend being asked in real certification with the help of these 2V0-41.20 practice exams aspirants. For all of the changes in the course, the experts check TestValid 2V0-41.20 dumps. TestValid also include practise testing, which proves to be an outstanding forum for testing the information gained. Refer to the links down below to access the study materials.
How to book the Professional VMware NSX-T Data Center 2V0-41.20 Exam
You have to follow these steps in order to participate for the Professional VMware NSX-T Data Center 2V0-41.20 Exam:
- Step 1: Go to VMware Website
- Step 2: Tap on “Schedule Exam”
- Step 3: On the page that appears, tap on “Sign up for an account”
- Step 4: Provide the details for the account and log in
- Step 5: Follow the instructions on your dashboard to schedule the exam
Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam
Installing, configuring, handling, and troubleshooting NSX-T Data Center 3.0 solutions should be 6 months or more of experience for the minimally eligible applicant. Candidates who are well aware of NSX-T characteristics, functions, and architectures should take this exam. People with at least 6 months of Linux and KVM hands-on experience are highly encouraged to apply for this certification as this will give them an edge. In IT and with VMware vSphere and its command line, they should have 1 year of experience operating. Additional industry-recognized IT certifications or accreditation would likely be held by the successful applicant. All the information found in the exam sections mentioned below should be in the MQC.
NEW QUESTION 32
Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?
- A. Uplink Profile
- B. Switching Profile
- C. Transport Node Profile
- D. Host Profile
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 33
Which CLI command shows syslog on NSX Manager?
- A. show log manager follow
- B. /var/log/sysloq/syslog.log
- C. get log-file auth.log
- D. get log-file syslog
Answer: D
NEW QUESTION 34
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. 1:1 NAT
- B. DNAT
- C. Reverse NAT
- D. SNAT
Answer: D
NEW QUESTION 35
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager logging-level debug
- B. set service manager log-level debug
- C. set service nsx-manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: A
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION 36
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Local-Switch-UUID> status
- B. get logical-switch <Logical-Switch-UUID>
- C. get logical-switches
- D. get logical-switch status
Answer: B
NEW QUESTION 37
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 38
Which step must be performed before deploying an additional NSX Manager from the NSX-T UI?
- A. Register vCenter Server as a Compute Manager.
- B. Create an Edge Cluster.
- C. Prepare the ESXi hosts as Transport Nodes.
- D. Configure the Virtual IP of the cluster.
Answer: A
NEW QUESTION 39
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
- A. Configure an IPsec session.
- B. Configure a distributed firewall policy.
- C. Create an IPsec service.
- D. Add a logical switch.
- E. Add a local endpoint.
Answer: A,C,E
NEW QUESTION 40
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,C
Explanation:
Explanation
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
NEW QUESTION 41
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh get-interface <VM Name>
- B. virsh show <VM Name> | grep interfaceid
- C. virsh dumpxml <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: C
NEW QUESTION 42
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?
- A. Manually create a gateway interface and mark it as transit.
- B. Manually create external uplink interface and mark it as transit.
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/ - C. Automatically created when DR is created.
- D. Automatically created when SR is initialized.
Answer: D
NEW QUESTION 43
Which discovery protocol is supported for hypervisor transport nodes?
- A. Link Layer Discovery Protocol
- B. Cisco Discovery Protocol
- C. Neighbor Discovery Protocol
- D. Adobe Real-time CDP
Answer: A
NEW QUESTION 44
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in hours.
- B. An alarm can be suppressed for a specific duration in seconds.
- C. An alarm can be suppressed for a specific duration in days.
- D. An alarm can be suppressed for a specific duration in minutes.
Answer: C
NEW QUESTION 45
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic load balancing
- B. increased north/south bandwidth
- C. stateful services leveraged
- D. Failover of services
- E. traffic predictability
Answer: A,B
NEW QUESTION 46
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Advertise All NAT Routes
- C. Information
- D. All Static Routes
- E. Advertise All LB VIP Routes
Answer: A,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html
NEW QUESTION 47
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
NEW QUESTION 48
......
2V0-41.20 Dumps Updated Practice Test and 92 unique questions: https://www.testvalid.com/2V0-41.20-exam-collection.html
Latest VCP-NV 2V0-41.20 Actual Free Exam Questions: https://drive.google.com/open?id=1zKYIvSbxJIwPFfWgLajPqEL6ossYnASQ