Microsoft 98-366 Real Exam Questions Test Engine Dumps Training With 259 Questions [Q137-Q161]

Share

Microsoft 98-366 Real Exam Questions Test Engine Dumps Training With 259 Questions

98-366 Actual Questions Answers PDF 100% Cover Real Exam Questions

NEW QUESTION 137
Security is a concern on wireless networks due to:

  • A. The radio broadcast access method.
  • B. Frequency modulation issues.
  • C. The potential for cross-talk.
  • D. Spread spectrum issues.

Answer: A

 

NEW QUESTION 138
What are two characteristics of fiber optic cable? (Choose two.)

  • A. Conducts electricity
  • B. Requires a polish for end connectors
  • C. Supports splicing
  • D. Requires metal conduit

Answer: B,C

Explanation:
Explanation/Reference:
C: A mechanical splice is a junction of two or more optical fibers that are aligned and held in place by a self- contained assembly (usually the size of a large carpenter's nail).[1] The fibers are not permanently joined, just precisely held together so that light can pass from one to another.
D: Modern connectors typically use a "physical contact" polish on the fiber and ferrule end. This is a slightly convex surface with the apex of the curve accurately centered on the fiber, so that when the connectors are mated the fiber cores come into direct contact with one another.
Note: Optical fiber connectors are used to join optical fibers where a connect/disconnect capability is required.
Due to the polishing and tuning procedures that may be incorporated into optical connector manufacturing, connectors are generally assembled onto optical fiber in a supplier's manufacturing facility.

 

NEW QUESTION 139
Which connectivity option for wide area networks (WANs) is most readily available in most geographic areas?

  • A. T1
  • B. ISDN
  • C. Dial-up
  • D. Leased line

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 140
A university has network links between various locations. Where would a T3 connection be appropriate?

  • A. Computer lab PC to lab printer
  • B. Main campus to a large satellite campus
  • C. Server to network in the main campus server room
  • D. Library laptop PC to Internet

Answer: C

Explanation:
Explanation/Reference:
T3 lines are a common aggregation of 28 T1 circuits that yields 44.736 Mbps total network bandwidth .
Besides being used for long-distance traffic, T3 lines are also often used to build the core of a business network at its headquarters

 

NEW QUESTION 141
Which of the following represents a Media Access Control (MAC) address?

  • A. 127.0.0.1
  • B. 05:35:AB:6E:Al:25
  • C. GV:ZC:KK:DK:FZ:CA
  • D. 255.255.255.0

Answer: B

Explanation:
The standard (IEEE 802) format for printing MAC-48 addresses in human-friendly form is six groups of two hexadecimal digits, separated by hyphens (-) or colons (:), in transmission order (e.g. 01-23-45-67-89-ab or 01:23:45:67:89:ab ).

 

NEW QUESTION 142
HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.

Answer:

Explanation:

 

NEW QUESTION 143
Which of the following represents a Media Access Control (MAC) address?

  • A. 127.0.0.1
  • B. 05:35:AB:6E:Al:25
  • C. GV:ZC:KK:DK:FZ:CA
  • D. 255.255.255.0

Answer: B

 

NEW QUESTION 144
The default port used for telnet is:

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
Explanation/Reference:
The telnet protocol is used to establish a connection to Transmission Control Protocol (TCP) port number
23, where a Telnet server application (telnetd) is listening.

 

NEW QUESTION 145
What port does DNS use?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 146
In addition to switching, multilayer switches also:

  • A. support 10 MB, 100 MB, and 1 GB local area network (LAN) ports.
  • B. provide Layer 3 routing functions.
  • C. interface with CAT3, CATS, CAT5e, and fiber optics.
  • D. operate by using only Layer 1 and 2 protocols.

Answer: B

 

NEW QUESTION 147
You ping a server by using fully qualified domain name (FQDN) and do not receive a response. You then ping the same server by using its IP address and receive a response.
Why do you receive a response on the second attempt but not on the first attempt?

  • A. The DNS is not resolving.
  • B. NSLOOKUP is stopped.
  • C. PING is improperly configured.
  • D. The DHCP server is offline.

Answer: A

Explanation:
Explanation/Reference:
DNS is not working.

 

NEW QUESTION 148
You ping a server by using fully qualified domain name (FQDN) and do not receive a response.
You then ping the same server by using its IP address and receive a response.
Why do you receive a response on the second attempt but not on the first attempt?

  • A. The DNS is not resolving.
  • B. NSLOOKUP is stopped.
  • C. PING is improperly configured.
  • D. The DHCP server is offline.

Answer: A

Explanation:
DNS is not working.

 

NEW QUESTION 149
This question requires that you evaluate the underlined text to determine if it is correct.
The loopback address of your computer is 127.0.0.1.
Select the correct answer if the underlined text does not make the statement correct.
Select 'No change is needed" if the underlined text makes the statement correct.

  • A. 169.254.0.5
  • B. 10.0.1.1
  • C. No change is needed
  • D. 192168.1.1

Answer: C

Explanation:
127.0.0.1 is the IPv4 loopback address.

 

NEW QUESTION 150
What are three characteristics of Ethernet network topology? (Choose three.)

  • A. It can use coaxial, twisted pair, and fiber optic media.
  • B. It comprises the largest share of the networks in place today.
  • C. It uses tokens to avoid collisions on the network.
  • D. It can negotiate different transmission speeds.
  • E. It is a non-switching protocol.

Answer: A,C,E

 

NEW QUESTION 151
What server is used to translate host names to IP addresses?

  • A. HOSTS
  • B. DHCP
  • C. WINS
  • D. DNS

Answer: D

 

NEW QUESTION 152
What is an example of a Layer 3 device that connects multiple computers and networks?

  • A. Switch
  • B. Packet
  • C. Router
  • D. Repeater

Answer: B

 

NEW QUESTION 153
At what speed does a T3 line run?

  • A. 4.5 Mbps
  • B. 44.7 Mbps
  • C. 128 Mbps
  • D. 1.5 Mbps

Answer: B

 

NEW QUESTION 154
You run the ipconfig command. The output is shown in the following image:

From these settings, you can tell that the computer:

  • A. Will have full Internet access
  • B. Will not be able to access the Internet
  • C. Will not be able to access the local network
  • D. Will have limited Internet access

Answer: D

 

NEW QUESTION 155
This question requires that you evaluate the underlined text to determine if it is correct.
To set lower security settings in Internet Explorer for an extranet site, add the site's URL to the Local Intranet zone.
Select the correct answer if the underlined text does not make the statement correct.
Select 'No change is needed" if the underlined text makes the statement correct.

  • A. Extranet Sites
  • B. Trusted Sites
  • C. No change is needed
  • D. Internet

Answer: B

Explanation:
Trusted sites
The level of security set for Trusted sites is applied to sites that you have specifically indicated to be ones that you trust not to damage your computer or information.
Reference: Change Internet Explorer Security settings

 

NEW QUESTION 156
Which technology provides the highest bit rate?

  • A. DS3
  • B. T1
  • C. ISDN
  • D. El

Answer: A

Explanation:
Explanation/Reference:
A DS3 line (sometimes also referred to as T3) is a dedicated, high bandwidth, fiber circuit with a speed of
45 Mbps.
Incorrect:
Not A: T1, 1.544Mbps
Not B: E1, 2.048Mbps
Not D: SDN 30B+1D (all 64K) ~ E1: 1.930Mbps

 

NEW QUESTION 157
HOTSPOT
You are configuring a wireless network with the Wireless Network Properties that are shown in the following image:

Use the drop-down menus to select the answer choice that completes each statement. Each correct selection is worth one point.

Answer:

Explanation:

 

NEW QUESTION 158
The topology of a local area network (LAN) is defined by the:

  • A. Type of cable being used.
  • B. Number of devices to connect.
  • C. Physical and logical characteristics.
  • D. Distance between workstations.

Answer: C

Explanation:
Explanation/Reference:
Network topology is the arrangement of the various elements (links, nodes, etc.) of a computer network.
Essentially, it is the topological structure of a network and may be depicted physically or logically.

 

NEW QUESTION 159
You run the ipconfig command. The output is shown in the following image:

From these settings, you can tell that the computer:

  • A. Will have full Internet access
  • B. Will not be able to access the Internet
  • C. Will not be able to access the local network
  • D. Will have limited Internet access

Answer: D

 

NEW QUESTION 160
What are two characteristics of wired Ethernet network topology? (Choose two.)

  • A. It uses network adapters physically encoded with an IP address
  • B. It is typically employed using twisted pair of fiber optic media
  • C. It uses tokens to avoid collisions on the network
  • D. It can negotiate different transmission speeds

Answer: A,D

 

NEW QUESTION 161
......

TestValid 98-366 Exam Practice Test Questions: https://www.testvalid.com/98-366-exam-collection.html