(May-2024) Get professional help from our HPE7-A01 Dumps PDF [Q61-Q78]

(May-2024) Get professional help from our HPE7-A01 Dumps PDF

Give You Free Regular Updates on HPE7-A01 Exam Questions

HP HPE7-A01 exam is a comprehensive certification program that is recognized by many leading organizations in the IT industry. Aruba Certified Campus Access Professional Exam certification program is designed to help IT professionals enhance their skills and knowledge in network access solutions, and to validate their expertise in this area. By passing HPE7-A01 exam, IT professionals can demonstrate their ability to design, deploy, and manage effective network access solutions, and can enhance their career opportunities in the IT industry.

NEW QUESTION # 61
Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?

Answer: C

Explanation:
Explanation
Option C is the only action that configures the DHCP relay on the SVI of VLAN 1000 on the CX 8360 switches. DHCP relay is a feature that allows a switch to forward DHCP requests from clients in one subnet to a DHCP server in another subnet. DHCP relay is required when the DHCP server and the clients are not in the same broadcast domain1.
Option C uses the following commands:
interface vlan 1000: This command enters the interface configuration mode for the SVI of VLAN 1000, which has an IP address of 10.102.39.1/24 and is used for wireless clients.
ip helper-address vrf default 10.200.1.100: This command configures the IP address of the DHCP server as a helper address for the SVI, which means that the switch will forward DHCP requests from clients on VLAN 1000 to this address. The vrf default parameter indicates that the SVI and the DHCP server are in the same VRF.

NEW QUESTION # 62
You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)

Answer: A,C

Explanation:
Explanation
Two parts of the solution for these requirements are Option C and Option E.
Option C is a part of the solution because it defines a policy-based routing action list named route_test, which specifies the next hop IP address as 10.1.1.253 for the matching traffic. This is the new default route that the user wants to use for the subnet 10.2.250.0/24. The interface null parameter indicates that the traffic will be routed to the next hop without using a specific interface1.
Option E is a part of the solution because it applies the policy-based routing action list route_test to the VLAN interface 250, which has an IP address of 10.2.250.1/24. This is the subnet that the user wants to test the new default route for. The apply policy command enables policy-based routing on the interface and associates it with the action list2.
Option A is not a part of the solution because it defines a policy-based routing action list named route_test, but does not specify the next hop IP address as 10.1.1.253, which is the new default route that the user wants to use. Instead, it specifies a next hop IP address of 10.1.1.254, which is different from the requirement.
Option B is not a part of the solution because it defines a policy-based routing action list named route_test, but does not specify any next hop IP address at all, which is necessary for policy-based routing to work. Instead, it specifies an interface null parameter without any IP address, which is invalid.
Option D is not a part of the solution because it applies the policy-based routing action list route_test to the VLAN interface 200, which has an IP address of 10.2.200.1/24. This is not the subnet that the user wants to test the new default route for, but a different subnet that should not be affected by this change.

NEW QUESTION # 63
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

Answer: B

Explanation:
Explanation
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
References:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-9D8E

NEW QUESTION # 64
Refer to the image.

Your customer is complaining of weak Wi-Fi coverage in their office. They mention that the office on the other side of the hall has much better signal What is the likely cause of this issue7

A. The AP is an outdoor access point.
B. The AP is configured in Mesh mode
C. The AP is a remote access point.
D. The AP is using a directional antenna.

Answer: D

Explanation:
The likely cause of the issue of weak Wi-Fi coverage in the office is that the AP is using a directional antenna. A directional antenna is an antenna that radiates or receives radio waves more strongly in one or more directions, creating a focused beam of signal. A directional antenna can provide better coverage and performance for a specific area, but it can also create dead zones or weak spots for other areas. The other options are incorrect because they either do not affect the Wi-Fi coverage or do not match the scenario. Reference: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/rf-fundamentals.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/antennas.htm

NEW QUESTION # 65
What is the best practice for handling voice traffic with dynamic segmentation on AOS-CX switches?

A. Switch authentication and local forwarding of the voice traffic
B. Switch authentication and user-based tunneling of the voice traffic.
C. Central authentication and port-based tunneling of the voice traffic.
D. Controller authentication and port-based tunneling of all traffic

Answer: A

Explanation:
Explanation
This is the best practice for handling voice traffic with dynamic segmentation on AOS-CX switches. Dynamic segmentation is a feature that allows AOS-CX switches to tunnel user traffic to a controller or another switch based on user roles and policies. For voice traffic, it is recommended to use switch authentication and local forwarding, which means the voice devices are authenticated by the switch and their traffic is forwarded locally without tunneling. This reduces latency and jitter for voice traffic and improves voice quality. The other options are incorrect because they either use central authentication or tunneling, which are not optimal for voice traffic. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch05.html
https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf

NEW QUESTION # 66
You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?

A. 2dB
B. 4dB
C. 3dB
D. 8dB

Answer: C

Explanation:
Explanation
The difference in the noise floor perceived by a client using a bonded 40 MHz wide channel as compared to an unbonded 20 MHz wide channel is 3 dB. The noise floor is the level of background noise in a given frequency band. When two adjacent channels are bonded, the noise floor increases by 3 dB because the bandwidth is doubled and more noise is captured. The other options are incorrect because they do not reflect the correct relationship between bandwidth and noise floor. References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/rf-fundam
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/channel-b

NEW QUESTION # 67
Match the terms below to their characteristics (Options may be used more than once or not at all.)

Answer:

Explanation:

Explanation
a) A device with IP address 10.1.3.7 in a network wants to send the traffic stream to a device with IP address
10.13.4.2 in the other network -> Unicast
b) One/more senders and one/more recipients participate in data transfer traffic -> Multicast c) Sent to all hosts on a remote network -> IP Directed Broadcast d) Sent to all NICs on the same network segment as the source NIC -> Broadcast References: 1 https://www.thestudygenius.com/unicast-broadcast-multicast/ The terms broadcast, IP directed broadcast, multicast, and unicast are different types of communication or data transmission over a network. They differ in how many devices are involved in the communication and how they address the messages. The following table summarizes the characteristics of each term1:
A screenshot of a computer Description automatically generated with medium confidence

NEW QUESTION # 68
List the WPA 4-Way Handshake functions in the correct order.

Answer:

Explanation:

* Proves knowledge of the PMK
* Exchanges messages for generating PTK
* Distributes an encrypted GTK to the client
* Sets first initialization vector (IV)

NEW QUESTION # 69
Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch.
The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role. Which default management role should have been assigned for the user?

A. sysadmin
B. sysops
C. administrators
D. config

Answer: B

Explanation:
Explanation
The correct answer is B. sysops.
The sysops user role is a predefined role that allows users to perform system operations on the switch, such as backup, restore, upgrade, or reboot. The sysops user role also has access to the PUT and POST methods for REST API, which can be used to modify the switch configuration. The sysops user role has a privilege level of
15, which is the highest level of access on the switch1.
The other options are incorrect because:
A: sysadmin: The sysadmin user role is a predefined role that allows users to view and modify the switch configuration using the CLI or the Web UI. The sysadmin user role does not have access to the REST API methods, and cannot perform firmware upgrades1.
C: administrators: The administrators user role is a predefined role that has full access to all switch configuration information and all REST API methods. This role is more than what the Director of Security requires1.
D: config: The config user role is a predefined role that allows users to view and modify the switch configuration using the CLI or the Web UI. The config user role does not have access to the REST API methods, and cannot perform firmware upgrades1.

NEW QUESTION # 70
Refer to Exhibit:

A company has deployed 200 AP-635 access points. To take advantage of the 6 GHz band, the administrator has attempted to configure a new WPA3-OWE SSID in Central but is not working as expected.
What would be the correct action to fix the issue?

A. Change the SSID to WPA3-Enterprise (CCM).
B. Change the SSID to WPA3-Personal.
C. Change the SSID to WPA3-Enterprise (CNSA).
D. Change the SSID to WPA3-Enhanced Open.

Answer: D

Explanation:
Explanation
The correct action to fix the issue is C. Change the SSID to WPA3-Enhanced Open.
WPA3-OWE is not a valid SSID type in Central. OWE stands for Opportunistic Wireless Encryption, and it is a feature that provides encryption for open networks without requiring authentication. OWE is also known as Enhanced Open, and it is one of the options for WPA3 SSIDs in Central1.
According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure a WPA3 SSID is:
Select the Security Level from the drop-down list. The following options are available:
WPA3-Personal: This option uses Simultaneous Authentication of Equals (SAE) to provide stronger password-based authentication and key exchange than WPA2-Personal.
WPA3-Enterprise: This option uses 192-bit cryptographic strength for authentication and encryption, as defined by the Commercial National Security Algorithm (CNSA) suite.
WPA3-Enterprise (CCM): This option uses 128-bit cryptographic strength for authentication and encryption, as defined by the Counter with CBC-MAC (CCM) mode.
WPA3-Enhanced Open: This option uses Opportunistic Wireless Encryption (OWE) to provide encryption for open networks without requiring authentication.
The other options are incorrect because:
A: WPA3-Enterprise (CNSA) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.
B: WPA3-Personal is a valid SSID type, but it requires a passphrase to join the network, which may not be suitable for the company's use case.
D: WPA3-Enterprise (CCM) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.

NEW QUESTION # 71
You need lo have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?

A. Attach OSPF process ID in the VRF configuration.
B. Create a new OSPF process ID with vrf name.
C. Attach a new OSFP process ID with a custom routing table
D. Create a new OSPF area, and attach VRF name.

Answer: B

Explanation:
Explanation
To create a new OSPF configuration for a separate routing table, you need to create a new OSPF process ID with vrf name. This will create a new OSPF instance that is associated with the specified VRF and its routing table. The other options are incorrect because they either do not create a new OSPF instance or do not associate it with a VRF. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html

NEW QUESTION # 72
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?

A. "The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients
B. The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.
C. When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz
D. The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

Answer: A

Explanation:
Explanation
This is the correct definition of Multicast Transmission Optimization in an HPE Aruba wireless network.
Multicast Transmission Optimization is a feature that improves the performance and reliability of multicast traffic by dynamically adjusting the transmission rate based on the highest broadcast rate across all associated clients. This ensures that multicast frames are sent at the optimal rate for each client and reduces retransmissions and packet loss. The other options are incorrect because they either describe different features or use incorrect terms. References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/multicast/multica
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/multicast/multica

NEW QUESTION # 73
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?

A. int 1/1/1. switching, ip address 10 10 10 1/24
B. int 1/1/1. ip address 10.10.10.1/24
C. int 1/1/1. routing, ip address 10.10.10 1/24
D. int 1/1/1. no switching, ip address 10 10 10.1/24

Answer: D

Explanation:
To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing. Reference: https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html

NEW QUESTION # 74
Match the solution components of NetConductor (Options may be used more than once or not at all.)

Answer:

Explanation:

NEW QUESTION # 75
In an ArubaOS 10 architecture using an AP and a gateway, what happens when a client attempts to join the network and the WLAN is configured with OWE?

A. No encryption is applied.
B. Authentication information is not exchanged
C. The Gateway will not respond.
D. RADIUS protocol is utilized.

Answer: B

Explanation:
Explanation
This is the correct statement about what happens when a client attempts to join the network and the WLAN is configured with OWE (Opportunistic Wireless Encryption). OWE is a standard that provides encryption for open networks without requiring any authentication or credentials from the client or the network. OWE uses a Diffie-Hellman key exchange mechanism to establish a secure session between the client and the AP without exchanging any authentication information. The other options are incorrect because they either describe scenarios that require authentication or encryption methods that are not used by OWE. References:
https://www.arubanetworks.com/assets/wp/WP_WiFi6.pdf
https://www.arubanetworks.com/assets/ds/DS_AP510Series.pdf

NEW QUESTION # 76
A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication What should be enabled to ensure the best roaming experience?

A. 802 .11h
B. 802.11W
C. 802.1X
D. 802. 11r

Answer: C

Explanation:
Explanation
https://www.howtogeek.com/794724/what-is-wi-fi-calling/ 2:
https://www.networkcomputing.com/networking/your-network-optimized-wifi-calling 3:
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/HTML/monitoring_6300-6400/Content/Chp_LEDs/fr Wi-Fi calling is a feature that allows you to make or receive voice calls over Wi-Fi instead of cellular network.
Wi-Fi calling can provide better voice quality and reliability in areas with poor or no cellular coverage.

NEW QUESTION # 77
Which method is used to onboard a new UXI in an existing environment with 802 1X authentication? (The sensor has no cellular connection)

A. Use the UXI app on your smartphone and connect the UXI via Bluetooth
B. Use the CLI via the serial cable and adjust the initial configuration.
C. Connect the new UXI from an already installed one and adjust the initial configuration.
D. Use the Aruba installer app on your smartphone to scan the barcode

Answer: A

Explanation:
Explanation
To onboard a new UXI in an existing environment with 802.1X authentication, you need to use the UXI app on your smartphone and connect the UXI via Bluetooth. The UXI app allows you to scan the QR code on the UXI sensor and configure its network settings, such as SSID, password, IP address, etc. The Bluetooth connection allows you to communicate with the UXI sensor without requiring any network access or cellular connection. The other options are incorrect because they either do not use the UXI app or do not use Bluetooth. References:
https://www.arubanetworks.com/products/network-management-operations/analytics-monitoring/user-experienc
https://help.centralon-prem.arubanetworks.com/2.5.4/documentation/online_help/content/nms-on-prem/aos-cx/g

NEW QUESTION # 78
......

HP HPE7-A01 exam is ideal for IT professionals who want to enhance their skills in wireless networking and advance their careers in this field. HPE7-A01 exam is also suitable for network administrators, engineers, and consultants who work in enterprise-level environments and want to validate their expertise in Aruba wireless technologies. By passing HPE7-A01 exam, candidates can prove to their employers and prospective clients that they have the knowledge and skills needed to design, deploy, and manage secure and reliable wireless networks using Aruba technology.

Achieve the HPE7-A01 Exam Best Results with Help from HP Certified Experts: https://www.testvalid.com/HPE7-A01-exam-collection.html

Provide HPE7-A01 Practice Test Engine for Preparation: https://drive.google.com/open?id=1cNhq_a8-O7eRLjjY-ZGCf3f10b2FCUr1

(May-2024) Get professional help from our HPE7-A01 Dumps PDF [Q61-Q78]

Related Articles