Get instant access to NCSC-Level-1 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader NCSC-Level-1 PDF dumps ( 80 Q&As)
NEW QUESTION 27
During the Knowledge Transfer, the customer askes where to find the details about their Nutanix environment, such as IP addresses, storage containers, and configuration.
Where can the consultant find this information?
- A. Test Plan
- B. As-Built Guide
- C. Tech Checklist
- D. Support Portal
Answer: B
NEW QUESTION 28
A customer wants to know the details of network validation testing.
Where can the consultant find this information?
- A. Handover checklist
- B. As-Built Guide
- C. Test plan
- D. Operations Guides
Answer: A
NEW QUESTION 29
What reference materials should be provided to the customer during the Knowledge Transfer?
- A. As-Built Guide, technical slides and checklist, Network Diagram
- B. As-Built Guide, Project Plan, links to documentation and resources
- C. As-Built Guide, technical slides and checklist, links to documentation and resources
- D. Questionnaire, technical slides and checklist, links to documentation and resources
Answer: C
NEW QUESTION 30
During a technical call with a customer, it is identified that this installation will be software only on Dell servers. The out-of-band management interfaces will not be given IP addresses until the consultant is onsite.
Which Foundation method should be used for this type of installation?
- A. Bare metal using LAN MAC addresses.
- B. Bare metal using iDRAC MAC addresses.
- C. Bare metal using node serial numbers.
- D. Bare metal using block serial numbers.
Answer: B
NEW QUESTION 31
To prepare for a new Nutanix installation, a consultant downloads the Foundation VM, imports the VM to their Desktop Virtualization Solution, and powers on the VM. The IPv4 static address on the host workstation and the Foundation VM have been configured, but pings between them fail.
Which two troubleshooting steps should the consultant perform? (Choose two.)
- A. Verify the virtual NIC in the Foundation VM is bound to the correct physical Host adapter.
- B. Verify the virtual NIC in the Foundation VM is bound to the correct wireless network adapter.
- C. Confirm the IP addresses and subnet masks are correct.
- D. Remove and re-import the Foundation VM to ensure the virtual NIC is set to Host-Only.
Answer: A,C
NEW QUESTION 32
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 33
A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8. The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?
- A. Use Prism Element to Expand the cluster and select the re-image option.
- B. Upgrade the cluster to 5.9 and add the node through Prism Element.
- C. Use Prism Element, which will downgrade the node by default during the node add process.
- D. Use the CLI and enter cluster add-node node-serial="node_serial".
Answer: A
NEW QUESTION 34
After installation, network ports are properly configured with the default active-backup bonding.
One 10GbE port goes to switch 1. Another 10GbE port goes to switch 2. A consultant tests failover by manually pulling one of the cables and notices it is taking too much time to failover, which is causing excessive packet loss.
What should the consultant enable to resolve this issue?
- A. LACP on switch
- B. PAgP
- C. Jumbo frames
- D. Portfast
Answer: D
NEW QUESTION 35
A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.
Which method should be consultant use to meet the requirements?
- A. Integrate AD authentication on Prism Central Only.
- B. Integrate AD authentication on all Prism Element Clusters.
- C. Proxy Prism Element traffic through Prism Central.
- D. Integrate AD authentication on all CVMs.
Answer: A
NEW QUESTION 36
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use crash cart and manually upgrade Foundation files on one node.
- B. Use the Foundation VM to upgrade Foundation on all nodes.
- C. Use the Foundation Applet to upgrade Foundation on a single node.
- D. Use latest version of Foundation to reimage all the nodes.
Answer: C
NEW QUESTION 37
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)
- A. vShpere DRS
- B. vSphere Power Management
- C. vSphere vMotion
- D. vSphere HA
Answer: A,D
NEW QUESTION 38
For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?
- A. ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000 - B. ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. ovs-vsctl set port br0-up bond_mode=balance-slb
- D. ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10
Answer: D
NEW QUESTION 39
A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?
- A. A Container-level whitelist entry was configured.
- B. A Global whitelist entry was configured.
- C. Compression was turned on for all containers.
- D. Deduplication was turned on for all containers.
Answer: B
NEW QUESTION 40
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
- A. first_boot.log
- B. genesis.out
- C. foundation.out
- D. service.log
Answer: D
NEW QUESTION 41
A consultant finishes creating a new ESXi cluster. The consultant connects to the nodes via laptop and a personal flat switch. The host/CVM network is on VLAN 23. The customer has the native VLAN on the ToR switches set to 23.
The customer wants to use LACP. Before placing the nodes on the customer network, the consultant tags VLAN 23 for each host and CVM. The consultant connects the nodes to the customer network and finds that they are unreachable.
What is causing this issue?
- A. The host and CVM are incorrectly configured.
- B. The hosts have not been migrated to a vSphere Distributed Switch.
- C. The customer has LACP fallback enabled on switch ports.
- D. Under the vSwitch0 settings, the consultant did not select Route based on IP hash.
Answer: B
NEW QUESTION 42
......
Oct-2021 Latest TestValid NCSC-Level-1 Exam Dumps with PDF and Exam Engine: https://www.testvalid.com/NCSC-Level-1-exam-collection.html