300-730 Exam Dumps - PDF Questions and Testing Engine
300-730 Dumps - The Sure Way To Pass Exam
What Domains Does 300-730 Measure?
In order to get a passing score in the Cisco 300-730 test, the entrant must have an adequate understanding of the following exam domains and all the terms that are included in it:
- Site-to-site VPN on firewalls and routers (15%)
The first domain for the official exam tests the applicant's knowledge of the concept of GETVPN. The candidate must be able to thoroughly describe it with ease. In addition to that, the exam also includes questions related to DMVPN and its implementation. This includes both hub-to-spoke as well as spoke-to-spoke technologies. Moreover, the candidate should also have a comprehension of FlexVPN and its implementation on IPv6 and IPv4 by using AAA that are local.
- Communication architecture security (30%)
The final topic of the Cisco 300-730 test deals with communication architectures and their security. In order to earn a passing score in such an exam, the candidate must be capable of identifying the elements for functions of GETVPN, DMVPN, FlexVPN, and IPsec used for various site-to-site VPN solutions. Moreover, this domain consists of questions regarding issues for remotely accessing VPN solutions. What's more, the applicant should be able to identify various VPN technologies based on the configuration output for both remote and site-to-site VPN solutions. This portion also includes the concept of split tunneling and its requirements along with designing solutions for both site-to-site and remotely accessible VPNs. In addition, the applicant should have the expertise in identifying considerations for designing such solutions based on functional requirements. Finally, this portion of the official exam includes the concept of algorithms for Elliptic Curve Cryptography (ECC).
- Accessing VPNs remotely (20%)
The second section of the Cisco 300-730 exam is all about VPNs and their remote access. To get through this part, the entrant's knowledge of the concept of AnyConnect will help tremendously. This includes the implementation of IKEv2 VPNs based on both ASA & various routers. The candidate must also understand AnyConnect SSLVPN, Clientless SSLVPN, and their implementation. Finally, this objective also deals with Flex VPN and its implementation on routes.
- CLI troubleshooting & ASDM (35%)
The third portion of the final test is the one that covers the highest percentage of all the questions. In particular, this exam domain includes 5 topics that deal with ASDM as well as CLI and how to use them for troubleshooting. Thus, the applicant needs to have an understanding of IPSec and how to troubleshoot it. In addition to that, such a domain also includes troubleshooting DMVPN along with FlexVPN. Finally, the entrant should have the idea of troubleshooting IKEv2 of AnyConnect and SSL VPNs along with SSLVPN Clientless on both routers alongside ASA.
Prerequisites for 300-730 Exam
The most important prerequisite for taking 300-730 SVPN exam is having sufficient knowledge of the concepts and skills that would be tested. For this, you may want to take a course to introduce you to the different domains to be evaluated. Still, there are no specific requirements except for the recommendation of having 3 to 5 years of experience with the implementation of security solutions if you aim for CCNP Security.
NEW QUESTION 27
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. plug-ins
- B. WebType ACL
- C. Smart Tunnel
- D. single sign-on
Answer: C
NEW QUESTION 28
Refer to the exhibit.
The VPN tunnel between the FlexVPN spoke and FlexVPN hub 192.168.0.12 is failing. What should be done to correct this issue?
- A. Add the address 192.168.0.12 255.255.255.255 command to the keyring configuration.
- B. Add the match fvrf any command to the IKEv2 policy.
- C. Add the aaa authorization group psk list Flex_AAA Flex_Auth command to the IKEv2 profile configuration.
- D. Add the tunnel mode gre ip command to the tunnel configuration.
Answer: C
NEW QUESTION 29
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. transform set
- B. Phase 1 policy
- C. preshared key
- D. crypto access list
Answer: C
NEW QUESTION 30
Which VPN solution uses TBAR?
- A. Cisco AnyConnect
- B. VTI
- C. DMVPN
- D. GETVPN
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get- vpn-xe-3s-book/sec-get-vpn.html
NEW QUESTION 31
Refer to the exhibit.
A network engineer is configuring a remote access SSLVPN and is unable to complete the connection using local credentials. What must be done to remediate this problem?
- A. Configure a AAA server group to authenticate the client.
- B. Enable the client protocol in the Cisco AnyConnect profile.
- C. Configure the group policy to force local authentication.
- D. Change the authentication method to local.
Answer: B
NEW QUESTION 32
In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed? (Choose two.)
- A. Set the maximum segment size.
- B. Verify that clients are using the correct authorization policy.
- C. Define the RADIUS server.
- D. Define the AAA server.
- E. Assign the list to an authorization policy.
Answer: B,E
NEW QUESTION 33
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (webvpn-attributes)
- B. tunnel-group (general-attributes)
- C. webvpn (group-policy)
- D. webvpn (global configuration)
Answer: D
NEW QUESTION 34
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. code version
- B. highest-priority value
- C. highest IP address
- D. lowest IP address
Answer: B
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/ deployment_guide_c07_554713.html
NEW QUESTION 35
What are two functions of ECDH and ECDSA? (Choose two.)
- A. nonrepudiation
- B. encryption
- C. revocation
- D. digital signature
- E. key exchange
Answer: D,E
NEW QUESTION 36
Refer to the exhibit.
Which type of VPN is used?
- A. Cisco Easy VPN
- B. GETVPN
- C. Cisco AnyConnect SSL VPN
- D. clientless SSL VPN
Answer: A
NEW QUESTION 37
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (webvpn-attributes)
- B. tunnel-group (general-attributes)
- C. webvpn (group-policy)
- D. webvpn (global configuration)
Answer: D
Explanation:
Section: Remote access VPNs
NEW QUESTION 38
Which VPN solution uses TBAR?
- A. Cisco AnyConnect
- B. VTI
- C. DMVPN
- D. GETVPN
Answer: D
NEW QUESTION 39
Refer to the exhibit.
Which type of VPN implementation is displayed?
- A. IKEv2 reconnect
- B. IKEv1 cluster
- C. IKEv2 backup gateway
- D. IKEv2 load balancer
Answer: D
NEW QUESTION 40
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing?
- A. dns-server value 10.1.1.3
- B. same-security-traffic permit inter-interface
- C. same-security-traffic permit intra-interface
- D. dns-server value 10.1.1.2
Answer: C
NEW QUESTION 41
Refer to the exhibit.
Which VPN technology is allowed for users connecting to the Employee tunnel group?
- A. IKEv2 AnyConnect
- B. crypto map
- C. SSL AnyConnect
- D. clientless
Answer: A
NEW QUESTION 42
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
- A. anyconnect profile SSL_profile flash:simos-profile.xml
- B. webvpn import profile SSL_profile flash:simos-profile.xml
- C. svc import profile SSL_profile flash:simos-profile.xml
- D. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/200533- AnyConnect-Configure-Basic-SSLVPN-for-I.html
NEW QUESTION 43 
Refer to the exhibit. Which VPN technology is allowed for users connecting to the Employee tunnel group?
- A. IKEv2 AnyConnect
- B. crypto map
- C. SSL AnyConnect
- D. clientless
Answer: A
Explanation:
Section: Remote access VPNs
NEW QUESTION 44
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN client profile for IPv6
- B. FlexVPN server to authenticate IPv6 peers by using EAP
- C. FlexVPN server to authorize groups by using an IPv6 external AAA
- D. FlexVPN server for an IPv6 dVTI session
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-3s/sec-flex- vpn-xe-3s-book/sec-cfg-flex-clnt.html
NEW QUESTION 45
An engineer would like Cisco AnyConnect users to be able to reach servers within the 10.10.0.0/16 subnet while all other traffic is sent out to the Internet. Which IPsec configuration accomplishes this task?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 46 
Refer to the exhibit. The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?
- A. transform set
- B. ikev2 proposal
- C. peer identity
- D. preshared key
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 47
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. Configure a backup server in the XML profile.
- B. The vpnsession-db must be cleared manually.
- C. AnyConnect client must point to the standby IP address.
- D. AnyConnect images must be uploaded to both failover ASA devices.
Answer: D
NEW QUESTION 48
An engineer must configure remote desktop connectivity for offsite admins via clientless SSL VPN, configured on a Cisco ASA to Windows Vista workstations. Which two configurations provide the requested access? (Choose two.)
- A. RDP2 bookmark via the RDP2 plugin
- B. VNC bookmark via the VNC plugin
- C. Telnet bookmark via the Telnet plugin
- D. Citrix bookmark via the ICA plugin
- E. SSH bookmark via the SSH plugin
Answer: A,E
NEW QUESTION 49
What is a requirement for smart tunnels to function properly?
- A. The user on the client machine must have admin access.
- B. Java or ActiveX must be enabled on the client machine.
- C. Applications must be UDP.
- D. Stateful failover must not be configured.
Answer: B
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html
NEW QUESTION 50
Refer to the exhibit.
DMVPN spoke-to-spoke traffic works, but it passes through the hub, and never sends direct spoke-to-spoke traffic. Based on the tunnel interface configuration shown, what must be configured on the hub to solve the issue?
- A. Enable IP redirects.
- B. Enable NHRP shortcut.
- C. Enable split horizon.
- D. Enable NHRP redirect.
Answer: B
NEW QUESTION 51
......
What Career Opportunities and Salary Will You Get?
After passing the related exams and earning the CCNP Security or the Network Security VPN Implementation certifications, the candidates can develop their careers in the field of network security and VPN execution. Such validations will open up various job opportunities for aspiring candidates with generous annual pay. For instance, applicants may choose to opt for the following roles with the annual average salaries as covered by Payscale.com below:
- IT Team Leader: $88,440;
- Security Engineer: $92,263;
- Network Engineer: $74,768;
- Systems Engineer: $80,658;
- Network Design Engineer: $80,000.
Pass Cisco 300-730 Exam Quickly With TestValid: https://www.testvalid.com/300-730-exam-collection.html
300-730 Exam Questions (Updated 2022) 100% Real Question Answers: https://drive.google.com/open?id=14Uca8y6QX14wBU77DIfniZCGOh_NlWeH