300-430 Free Certification Exam Material from TestValid with 128 Questions [Q27-Q48]

300-430 Free Certification Exam Material from TestValid with 128 Questions

Use Real 300-430 - 100% Cover Real Exam Questions

NEW QUESTION 27
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

A. client MAC address
B. WLC IP address
C. client description
D. AP name
E. X, Y real location

Answer: A,E

NEW QUESTION 28
Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

A. APSD
B. 802.11e
C. WMM
D. TSPEC
E. SIFS

Answer: B,C

NEW QUESTION 29
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

A. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
B. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
C. Configure a second WLC to support half of the APs in the deployment.
D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.

Answer: B

NEW QUESTION 30
What is an important consideration when implementing a dual SSID design for BYOD?

A. One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
B. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
C. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
D. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.

Answer: A

Explanation:

NEW QUESTION 31
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

A. client MAC address
B. WLC IP address
C. client description
D. AP name
E. X, Y real location

Answer: A,E

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_g

NEW QUESTION 32
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

A. Client Exclusion is enabled
B. ISE NAC is enabled
C. FlexConnect Local Auth is disabled
D. 802.11r Fast Transition is enabled

Answer: C

Explanation:

NEW QUESTION 33
Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

A. APSD
B. 802.11e
C. WMM
D. TSPEC
E. SIFS

Answer: B,C

NEW QUESTION 34
Which two events are outcomes of a successful RF jamming attack? (Choose two.)

A. deauthentication broadcast
B. physical damage to AP hardware
C. disruption of WLAN services
D. deauthentication multicast
E. unauthentication association

Answer: B,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/72/wIPS_Configuration/Guide/wIPS_72/msecg_appA

NEW QUESTION 35
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

A. 7 days
B. 3 hours
C. 24 hours
D. 3 days

Answer: A

Explanation:
Explanation

(7 Days is the max, you can select

NEW QUESTION 36
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)

A. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
B. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
D. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
E. NTP can be configured, but that is not recommended.

Answer: A,C

Explanation:
Explanation

https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html

NEW QUESTION 37
An engineer must configure MSE to provide guests access using social media authentication. Which service does the engineer configure so that guests use Facebook credentials to authenticate'?

A. Client Connect
B. Guest Connect
C. Visitor Connect
D. Social Connect

Answer: D

NEW QUESTION 38
An engineer must implement a BYDD policy with these requirements:
* Onboarding unknown machines
* Easily scalable
* Low overhead on the wireless network Which method satisfies these requirements?

A. triple SSID
B. dual SSID
C. single SSID
D. open SSID

Answer: C

NEW QUESTION 39
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.

Answer:

Explanation:

NEW QUESTION 40
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?

A. mls qos trust dscp configured on the controller switch port
B. WMM set to required on the WLAN
C. mls qos trust cos configured on the controller switch port
D. Platinum QoS configured on the WLAN

Answer: A

Explanation:

NEW QUESTION 41
Which devices can be tracked with the Cisco Context Aware Services?

A. Cisco certified wireless devices
B. wired devices
C. wireless devices
D. wired and wireless devices

Answer: D

Explanation:
Explanation

https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html

NEW QUESTION 42
An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)

A. The sizes of the primary and secondary Cisco CMX installations differ.
B. The Cisco CMX instances are installed in the same subnet.
C. The delay between the primary and secondary instance is 200 ms.
D. The types of the primary and secondary Cisco CMX installations differ.
E. Both Cisco CMX installations are virtual.

Answer: A,D

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/106/cmx_config/b_cg_cmx106/managing_cisco_cmx_system_settings.html

NEW QUESTION 43
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?

A. FlexConnect mode with OfficeExtend enabled
B. FlexConned mode with central switching enabled
C. FlexConnect mode with central authentication
D. FlexConnect mode with local authentication

Answer: A

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12

NEW QUESTION 44
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

A. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
B. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
C. Configure a second WLC to support half of the APs in the deployment.
D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.

Answer: B

Explanation:

NEW QUESTION 45
Refer to the exhibit.

An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?

A. Packet direction has no significance; it is always Any.
B. It must be Outbound because it is traffic that is generated from the WLC.
C. It must be Inbound because traffic goes to the WLC.
D. To have the complete list of options, the CPU ACL must be created only by the CLI.

Answer: C

Explanation:

NEW QUESTION 46
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

A. 7 days
B. 3 hours
C. 24 hours
D. 3 days

Answer: A

Explanation:
Explanation

(7 Days is the max, you can select

NEW QUESTION 47
Refer to the exhibit.

An engineer needs to configure location services in an office. The requirement is to use FastLocate and achieve higher locations refresh rates. Which location-based technique should be implemented?