2023 Latest 100% Exam Passing Ratio - E-S4HCON2023 Dumps PDF
Pass Exam With Full Sureness - E-S4HCON2023 Dumps with 78 Questions
NEW QUESTION # 14
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?
- A. EU_CLONE_MIG_SOT_RUN
- B. EU_CLONE_MIG_DT_RUN
- C. EU_IMPORT_ALL
- D. EU_CLONE_MIG_DT_CREATE
Answer: B
NEW QUESTION # 15
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Download it from SAP Support Portal
- B. Apply the corresponding SAP note via SAP Note Assistant
- C. Configure it within transaction ATC
- D. Generate it by analyzing the specific custom code via RFC
Answer: A
NEW QUESTION # 16
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Shadow repository creation (EU_IMPORT*)
- B. Downtime migration (EU_CLONE_MIG_DT_RUN)
- C. ParaUel distribution (PARDIST_SHD)
- D. Uptime migration (EU_CLONE_MIG_UT_RUN)
Answer: D
NEW QUESTION # 17
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?
- A. An SAP S4HANA 1709 sandbox system
- B. AA
- C. A Standalone SAP system with ABAP 7.51 or above
Answer: A,C
NEW QUESTION # 18
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:
- A. It is a database-specific document
- B. It contains a troubleshooting section
- C. It is target release specific
- D. It contains a section "free space requirements"
Answer: C,D
NEW QUESTION # 19
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison of all tables using check sum.
- B. It performs a comparison on selected tables using check sum.
- C. It performs a comparison on all tables using row counts.
- D. It does NOT perform any table comparison.
Answer: C
NEW QUESTION # 20
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Standard" when applying SAP Support Packages
- B. Using the database migration option (DMO) for SUM
- C. Using the main configuration option "Single System" in case of an upgrade.
- D. Using the main configuration option "Single System" when installing an Add-On
Answer: D
NEW QUESTION # 21
What do you need to consider when performing the SI checks for an SAP S'4I 1ANA conversion? Note There are 2 correct answers to this question.
- A. The errors from the SI checks must be solved, otherwise. SUM will report an error
- B. You need to build up an SI check framework by applying SAP Notes
- C. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework
- D. The SI checks are executed in the development system and the results are transported into the subsequent systems
Answer: B,C
NEW QUESTION # 22
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Install add-on SAP Gateway 7.50
- B. Delete client 066 (Early Watch Client)
- C. Uninstall industry extensions not supported by SAP S/4HANA
- D. Uninstall Fiori apps not released for SAP_UI 7.50
Answer: B,D
NEW QUESTION # 23
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Shadow on target creation
- B. Downtime migration
- C. Downtime conversion
- D. Silent data migration (SDM)
Answer: B
NEW QUESTION # 24
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.
- A. The path was stored in file host_profile during registration
- B. The path was stored to the environment of user <sid>adm during registration
- C. The path was stored in file sumabap conf during registration
- D. The path is taken from the URL entered in the browser to start SUM
Answer: C
NEW QUESTION # 25
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
- B. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
- C. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- D. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.
Answer: C
NEW QUESTION # 26
Which of the following SUM activities require a stack XML file calculated by the maintenance planner?
Note: There are 3 correct answers to this question.
- A. Prerequisite check
- B. DMO without system update
- C. Benchmark tool
- D. SAP S/4HANA conversion including DMO
- E. SAP S/4HANA conversion without DMO
Answer: A,D,E
NEW QUESTION # 27
You are executing a standard SUM procedure to update an SAP system using main configuration mode
"Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Before the downtime starts
- B. Early in the downtime
- C. As part of the cleanup process
- D. At the end of the downtime
Answer: A
NEW QUESTION # 28
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. An overview about possible upgrade paths
- B. The link to different patch levels to SUM
- C. AA
- D. The corrections to the SUM Guide
Answer: A,B,D
NEW QUESTION # 29
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Parameter file SAPup_add.par
- B. MIGRATE J5T_DUR_XML file from a previous run
- C. Breakpoint configuration file SAPUPPHAS.BRK
- D. Stack XML file calculated by the Maintenance Planner
Answer: B,D
NEW QUESTION # 30
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.
- A. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
- B. The source system is non-Unicode and the target database is a scale-out system.
- C. SAP HANA Landscape Reorganization required a manual step to edit a file.
- D. Network capacity between exporting and importing R3load processes must be.
- E. The target database size increases temporarily because of the Shadow Repository.
Answer: A,C
NEW QUESTION # 31
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. PARMVNT_UPG
- B. TABIMJJPG
- C. TABIM_SHADOW_*
- D. PARDIST_SHD
Answer: B
NEW QUESTION # 32
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?
- A. The SAP support packages of the support package stack, calculated by the maintenance planner
- B. The SAP support packages in the download directory that are newer than the selected support package stack
- C. The SAP support packages that will be bound to the conversion
- D. The SAP support packages contained in the upgrade media, calculated by the maintenance planner
Answer: B
NEW QUESTION # 33
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in client 000 of the shadow system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of user DDIC in the development client of the development system
Answer: C
NEW QUESTION # 34
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in client 000 of the shadow system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of user DDIC in the development client of the development system
Answer: B
NEW QUESTION # 35
......
Verified E-S4HCON2023 dumps Q&As - 100% Pass from TestValid: https://www.testvalid.com/E-S4HCON2023-exam-collection.html
Pass E-S4HCON2023 Exam in First Attempt Guaranteed 2023 Dumps: https://drive.google.com/open?id=1Y_yi1uXYZD0gHkp9RJCSFK_O4o0x1At_